Contents
Why isnt my Paslode nail gun firing?
Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly. The nailer needs cleaned – especially if it has been used a lot without regular cleaning!
How do you use a nail gun step by step?
How to Use a Nail Gun
- STEP 1: Load the nail gun.
- STEP 2: Connect the power source.
- STEP 3: Position the tip of the nail gun and shoot a nail.
- STEP 4: Adjust the depth of the nail.
- STEP 5: Remove nail jams as needed.
Why is my nail gun not working?
Jams are the most common cause of a nailer not firing. Thankfully, they are often easy to clear. For safety, first disconnect the tool from the air supply, retract the feeder mechanism, and remove any excess fasteners from the magazine. From there, clearing the jam depends on what type of nailer you have.
Do you have to oil a Paslode nail gun?
Tool Cleaning and Oiling Periodic cleaning and oiling are necessary to keep fuel-powered cordless nailers operating properly. For example, the Paslode Cordless Framing Nailer (CF325 or new CF325Li with lithium ion battery) needs to be cleaned and oiled at least every 50,000 cycles.
Do Paslode fuel cells expire?
Paslode fuel cells have a long shelf life with the inbuilt design and metering valve system enabling the product to be stored for about 27 months.
Why is my nail gun only shooting air?
If you try to fire a pneumatic nail gun or stapler, but only hear air leaking when engaging the trigger, it’s likely that your tool’s “O-Ring” is not sealing properly. Simply stretch the “O-Ring” on the firing valve and apply grease. This should take care of the issue – helping your air tool run properly.
What do you need to know about Paslode nail gun?
They’re easy-to-follow with simple instructions. The first video is for framing nailers and positive placement nailers, whereas the second video is for finishing nailers and multi-purpose nailers. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
What’s the best way to clean a nail gun?
At Kelvin Power Tools, we stock Paslode cleaning kits which provide everything you need to clean and lubricate your tool. The videos below from Paslode demonstrate how to properly clean and lubricate your nailer. They’re easy-to-follow with simple instructions.
How often should I Clean my Paslode Nailer?
Paslode recommend that you clean and lubricate your nailer every 50,000 shots. If it’s being used in a dirty environment or at high nailing rates for extended periods of time then this should be more often.
Why is my Paslode framing gun not working?
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later. Get Your Paslode Oil & Degreaser Here!