Contents
How do I fix my Samsung wireless subwoofer?
Sound drops out from the wireless subwoofer
- Check for a firmware update.
- Run a speaker test.
- Confirm the subwoofer is in range of the soundbar.
- Check all sources connected to the soundbar.
- Reset the power on the subwoofer and try again.
- Manually reconnect the wireless subwoofer to the soundbar.
- Request service.
How do I turn the subwoofer up on my Samsung Soundbar?
1 Press the Woofer button on the Sound bar remote. SW 0 appears on the front display of the Sound bar. 2 Press the Skip forward button above the Audio Sync button on the Sound bar remote to increase the Subwoofer volume.
How do you reset a subwoofer?
Reset the system. Press and hold the Power button while pressing the Input button and the VOL- button (at the same time). When RESET appears on the front panel display, release the buttons. Unplug the power cord for 30 seconds.
Why has my Samsung sound bar stopped working?
If the pairing is not working, it is typically because it is being performed incorrectly, or the device may need to be reset, updated, or may not be compatible with the soundbar. Either it doesn’t have power, or it’s lost the connection to your soundbar. If it’s not either of those, then it needs service.
How do I know if my sub is blown?
Subwoofers are blown when they either receive too much power or too much of a distorted signal. You can find out if your subwoofer is blown by listening to the sound, reviewing the movement of the woofer, and using a multimeter to find out if the coil is blown.
How do I reset my Samsung wireless subwoofer?
Plug the power cord into an AC wall outlet. Press and hold the ID SET button on the back of the subwoofer for 5 seconds. note: Use a small, pointed object, such as a paperclip. Continue holding until the STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
Why is my subwoofer not turning on on my soundbar?
If your subwoofer isn’t turning on, there’s really only three possibilities. Either it doesn’t have power, or it’s lost the connection to your soundbar. If it’s not either of those, then it needs service. The steps to check which possibility is occurring are quick and easy. Check your wall outlet. Unplug the subwoofer and plug it back in.
How can I tell if my subwoofer is working?
Perform a quick test on the wires to check that they work. Check outlets, power cable, and fuse. Most subwoofers have a “standby” LED that glows to indicate active power. If it’s not lit, check that the subwoofer is securely plugged into a wall socket, surge protector, or power strip.
Why is the blue light on my subwoofer not working?
As soon as the subwoofer is plugged in to the power outlet, the red light displays for a second, goes out and then the blue light blinks constantly. It will only stop blinking blue when unplugged from power. The manual says it should blink for 30 seconds and then go into Stand by mode (blue light off and red light on solid).
How can I get my soundbar to sync with my subwoofer?
2) soundbar is powered off (standby/plugged in), press and hold Mute button until display shows ‘ID Set’ (this occurs as instructed), 3) Power on the soundbar. When I do this, after the soundbar displays shows its input setting, it then displays a message to Check the Subwoofer.