Menu Close

How do I move Unifi AP to a new controller?

Jim Brown

How do I move Unifi AP to a new controller?

Migrating UNIFI APs to new controller

  1. SSH into AP with former controller’s credentials.
  2. reset to default with ‘syswrapper.sh restor-default’
  3. connection will be terminated.
  4. SSH into AP with ubnt/ubnt.
  5. use mca-cli shell.
  6. set-inform. x.x.x.x:8080/inform.
  7. AP will reboot and provision.

How do I change my Unifi controller?

Best Practice – Replace existing unifi controller

  1. Install new controller h/w locally.
  2. Backup from live controller then shut down live controller (service)
  3. Load backup to new controller and check config.
  4. Remove controller software from old (Windows) PC.

How do I force adopt UniFi AP?

Adoption via the UniFi Network web application

  1. Launch the Network web application from unifi.ui.com.
  2. Open the UniFi Devices page.
  3. Select the device that is ready for adoption.
  4. Click Adopt.

How do I backup my UniFi controller?

To generate a new UniFi backup file ( . unifi ), on your UniFi OS Console:

  1. Access and log into your UniFi OS Console at unifi.ui.com or locally via its IP address.
  2. Go to System Settings > Advanced and enable the Back up Device toggle if disabled.
  3. Click Download to download your backup file.

How do I adopt UniFi AP adoption failure?

In order to resolve this particular issue, you will need to reset your UniFi device first. The reset button is usually located right next to the ethernet port of your UniFi hardware, and requires a needle-sized tool to press and hold until it lights up again.

How do you manually adopt a UniFi switch?

From the UniFi Controller dashboard, click DEVICES in the left menu bar. 2. On the Devices screen, locate the UniFi Switch in the list of devices under the Name/MAC Address column. To adopt the UniFi Switch, click ADOPT.

How do I transfer my unifi controller to another computer?

Move the Unifi Controller to different Computer. You can backup the current configuration and move it to a different computer. And restore the downloaded backup to another controller from settings tab > maintenance tab > restore backup. Click to see full answer

How to add a new unifi AP to the controller?

To add a new UniFi AP to the Controller, first, make sure it’s connected to your networks DHCP Server that is in the same network as your UniFi controller. Once this is done, give the AP a few minutes to boot up. Next, log in to your UniFi controller Web GUI.

How to Reset my unifi controller to factory settings?

1 Log in to the UniFi Network Controller. In the Devices page, click on the UAP you wish to reset. 2 Select the Configuration tab, and click Manage Device to expand. 3 Click the Forget button. This will erase all configuration and history for that device, effectively resetting it.

How to migrate Ubiquiti unifi access point to a new controller?

How To Migrate/Move Ubiquiti Unifi Access Point to a New Controller. Step 1: SSH into WAP. using putty or similar. Step 2: type in the command “set-default” wait 1 minute and reconnect to WAP ssh into the access point again after about 20 seconds using the ubiquiti Step 3: at the UniFi# prompt …