Menu Close

How do you clean a Heat and Glo fireplace?

How do you clean a Heat and Glo fireplace?

Remove the front face or louvers of your fireplace; carefully remove the glass assembly of your fireplace (following the instructions in your manual) and lay it on a soft surface. Wipe both sides with household glass cleaner (do not use a product with ammonia), using a soft cloth.

How do you clean clogged burners on a gas fireplace?

How to Clean Gas Fireplace Burners

  1. Turn off the gas valve to the burners.
  2. Run your vacuum cleaner’s hose attachment over the burners to collect loose buildup.
  3. Scrub stuck-on residue off of the burners, using a soft cleaning brush.

How often should you do maintenance on a heat and Glo gas fireplace?

How often do I have to clean the gas fireplace and vent? Although the frequency of your fireplace servicing and maintenance will depend on use and the type of installation, you should have a qualified service technician perform an appliance check-up at the beginning of each heating season.

Why does my heat and Glo fireplace shuts off?

Heat & Glo fireplaces will sometimes turn on and off without signs of why. This can be caused by several issues. The most common issue is the overheating shutoff sensor, which will cause the unit to shut off, and then back on after it has cooled. The next common issue is problems with the thermocouple.

Why am I not getting gas to my fireplace?

Check your breaker box and reset any tripped breakers you come across. Gas Valves: Make sure that your gas valve is open and in the on position to ensure the flow of gas to your fireplace. This should be located in the firebox. If you have an older model, a key in the wall or floor should be nearby.

How do you seal a gas fireplace?

You can seal off an unused fireplace by installing wood or light-gauge metal framing, insulation and drywall over the entire wall or opening. If you intend on using it in the future, install an insert constructed out of 2″ rigid foam board glued to MDF. Seal around the insert using neoprene backer rod insulation.

What’s the best way to clean glass on a gas fireplace?

Use fireplace glass cleaner to clean the glass covering of your gas fireplace. Spray the cleaner on a dry cloth and rub it in a circular motion on the glass. If the glass has a lot of dirt and grime on it, spray the cleaner directly on the glass and rub it off using newspaper.

What to do when your heat and Glo fireplace is not working?

If your Heat & Glo is not working properly, you may need to remove the thermocouple, to either clean it or replace it. Here is the step by step method to remove the thermocouple. First, you will need to turn the gas valve on the front of the unit to the off position. Once you have done this, allow some time for the unit to cool down.

How do you turn off a gas fireplace?

Here is the step by step method to remove the thermocouple. First, you will need to turn the gas valve on the front of the unit to the off position. Once you have done this, allow some time for the unit to cool down. Next, put a tarp down, in front of the fireplace. You will need to remove the decorative logs and place them on the tarp.

What’s the best way to clean fireplace logs?

Use a soft paintbrush to brush away any dirt or debris from the logs. Be gentle with your brushing because you don’t want to damage the fragile logs. Be sure to check each log for signs of corrosion — things like cracking, splitting, or burn holes — before returning them to the fireplace for use again.