Menu Close

How do I know if my washing machine actuator is bad?

Jim Brown

How do I know if my washing machine actuator is bad?

When the actuator fails there is usually and awful lot of grinding noise, and the tub and agitator operate at a slow speed, if at all. In most models, you will have an F7 -E1 or E5 error code in the display.

Which actuator is used in washing machine?

A hydraulic servo actuator (8) used for this purpose comprises at least one piston (9) actuated by the pressure of the water supply mains transmitted thereto through an arrangement of solenoid valves (5,5A) operable to control the displacement of the piston in opposite directions corresponding to the operations to be …

Do washing machines have actuators?

The microprocessor unit in your washing machine controls sensors, valves and actuators responsible for controlling the parts that clean your clothes. If the computer fails to control these mechanisms, or one of the mechanisms fails, your clothes will not get clean.

Why is my washer stuck on sensing?

When Kenmore HE Washer is stuck on Sensing Cycle and not proceed to the Wash cycle, most likely one of these 3 parts malfunction: Failed Water Inlet Valve or Inlet Valve Tap is in OFF position. Shift Actuator not able to change position, before Wash cycle. Control Board malfunctioned.

What does the shift actuator do on a Whirlpool washer?

The actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. It also houses a transmission speed/position optical sensor.

What is the shifter on a washing machine?

Control. Control of the mode shifter comes from the motor inverter circuit. First the motor senses the load and engages the drive, after the tub fills with water. When the washer starts agitating, the inverter sends power to the mode shifter coil for about 18 seconds.

What do actuators do?

An actuator is a device that uses a form of power to convert a control signal into mechanical motion. Industrial plants use actuators to operate valves, dampers, fluid couplings, and other devices used in industrial process control. The industrial actuator can use air, hydraulic fluid, or electricity for motive power.

Do all washing machines have sensors?

Like many modern appliances, washing machines today use a variety of sensors to ensure proper, safe, and energy-efficient operation. Reed switches and sensors consume no power, while Hall Effect devices are semiconductors and will consume a small amount of current in both the activated and de-activated state.

What is the function of the shift actuator?

The actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. It also houses a transmission speed/position optical sensor. Consider replacing the washer drive belt while you have the washer apart. Does this part fit my product?

What does the actuator do on a Kenmore washing machine?

Actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. Also has transmission speed/position optical sensor

What is the shift actuator on a whirlpool washer?

Shift Actuator – 120V 60Hz – Whirlpool WPW10006355 – This part changes the transmission from agitation to spin mode. This actuator is for washers. Actuator… Our response to COVID-19 We’re open and continuing to ship packages. Learn about our response to COVID-19 30 Day Returns Fast Delivery1.8 days Average Via Standard Shipping

What are the symptoms of a bad actuator located under the washer?

For Whirlpool Shift Actuator (Part Number: AP6014711) Answer or Comment View all Questions what are the symptoms of a bad actuator located under the whirlpool top load washer. It is located next to the motor the pt# is w10006355.

How do I know if my washing machine actuator is bad?

Jim Brown

How do I know if my washing machine actuator is bad?

When the actuator fails there is usually and awful lot of grinding noise, and the tub and agitator operate at a slow speed, if at all. In most models, you will have an F7 -E1 or E5 error code in the display.

What is a washer shifter?

Located on the bottom of the gear case, the shifter assembly’s motor shifts the drive system between agitating and spinning. If the shifter malfunctions, the electronic control board shuts the washer off and displays an error code.

Why is my washer stuck on sensing?

When Kenmore HE Washer is stuck on Sensing Cycle and not proceed to the Wash cycle, most likely one of these 3 parts malfunction: Failed Water Inlet Valve or Inlet Valve Tap is in OFF position. Shift Actuator not able to change position, before Wash cycle. Control Board malfunctioned.

Why is the lid lock light flashing?

Lid Lock Light Flashing: The Lid Lock Light will flash if Lid Lock has not moved into the Lock Position, the Lock Motor can not be powered, or the Lid is not closed completely due to interference. Some models will lock immediately, while others will not lock until after the wash cycle has started.

How does a Splutch cam work?

The Splutch Cam Assembly transfers energy from the motor to the transmission in your washer, allowing it to spin. This repair is relatively easy to complete yourself, and to help you out we have an easy Step-by-Step Repair Guide for you today.

How are sensors used in automatic washing machines?

Specific sensors can measure temperature, pressure, vibration, proximity and force. While a pressure sensor can monitor water level, a force sensor measures the payload weight at the beginning of the wash cycle. A proximity sensor verifies that the door is closed and latched before start-up.

Do all washing machines have sensors?

Like many modern appliances, washing machines today use a variety of sensors to ensure proper, safe, and energy-efficient operation. Reed switches and sensors consume no power, while Hall Effect devices are semiconductors and will consume a small amount of current in both the activated and de-activated state.

What does the actuator do on a Kenmore washing machine?

Actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. Also has transmission speed/position optical sensor

What is the shift actuator on a washing machine?

Washing machine mode shift actuator. The actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. It also houses a transmission speed/position optical sensor. Consider replacing the washer drive belt while you have the washer apart. Does this part fit my product?

What does the actuator do on a whirlpool?

It has a full agitator but no coupler drive. newer style I guess Johnfor Model Number whirlpool actuator pt# w10006355 ANSWERJohn, ” The actuator serves several functions. It has a synchronous motor that shifts the splutch slider and monitors the position of the splutch. It also houses a transmission speed/position optical sensor.”

What is the function of the actuator in a car?

ANSWER John, ” The actuator serves several functions. It has a synchronous motor that shifts the splutch slider and monitors the position of the splutch. It also houses a transmission speed/position optical sensor.” The “splutch” is what determines if the transmission agitates or spins.

How do I know if my washing machine actuator is bad?

Jim Brown

How do I know if my washing machine actuator is bad?

When the actuator fails there is usually and awful lot of grinding noise, and the tub and agitator operate at a slow speed, if at all. In most models, you will have an F7 -E1 or E5 error code in the display.

Which actuator is used in washing machine?

A hydraulic servo actuator (8) used for this purpose comprises at least one piston (9) actuated by the pressure of the water supply mains transmitted thereto through an arrangement of solenoid valves (5,5A) operable to control the displacement of the piston in opposite directions corresponding to the operations to be …

Do washing machines have actuators?

The microprocessor unit in your washing machine controls sensors, valves and actuators responsible for controlling the parts that clean your clothes. If the computer fails to control these mechanisms, or one of the mechanisms fails, your clothes will not get clean.

Why is my washer stuck on sensing?

When Kenmore HE Washer is stuck on Sensing Cycle and not proceed to the Wash cycle, most likely one of these 3 parts malfunction: Failed Water Inlet Valve or Inlet Valve Tap is in OFF position. Shift Actuator not able to change position, before Wash cycle. Control Board malfunctioned.

Do all washing machines have sensors?

Like many modern appliances, washing machines today use a variety of sensors to ensure proper, safe, and energy-efficient operation. Reed switches and sensors consume no power, while Hall Effect devices are semiconductors and will consume a small amount of current in both the activated and de-activated state.

What is a washer shifter?

Located on the bottom of the gear case, the shifter assembly’s motor shifts the drive system between agitating and spinning. If the shifter malfunctions, the electronic control board shuts the washer off and displays an error code.

How are sensors used in automatic washing machines?

Specific sensors can measure temperature, pressure, vibration, proximity and force. While a pressure sensor can monitor water level, a force sensor measures the payload weight at the beginning of the wash cycle. A proximity sensor verifies that the door is closed and latched before start-up.

What is the shift actuator on a washing machine?

Washing machine mode shift actuator. The actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. It also houses a transmission speed/position optical sensor. Consider replacing the washer drive belt while you have the washer apart. Does this part fit my product?

What does the actuator do on a Kenmore washing machine?

Actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. Also has transmission speed/position optical sensor

What does the actuator do on a whirlpool?

It has a full agitator but no coupler drive. newer style I guess Johnfor Model Number whirlpool actuator pt# w10006355 ANSWERJohn, ” The actuator serves several functions. It has a synchronous motor that shifts the splutch slider and monitors the position of the splutch. It also houses a transmission speed/position optical sensor.”

What is the function of the actuator in a car?

ANSWER John, ” The actuator serves several functions. It has a synchronous motor that shifts the splutch slider and monitors the position of the splutch. It also houses a transmission speed/position optical sensor.” The “splutch” is what determines if the transmission agitates or spins.