How much does a 4L60E transmission fluid weigh?

The transmission weighs 146 pounds dry and 162 pounds with the fluids installed.

How much is a 4 L 80 E transmission weigh?

What Does 4L80E Mean?

GM Transmission Weights
Transmission	Weight (LBS)
4L60E	155
TH400	130
4L80E	187

How much does a 4×4 transmission weigh?

Most transmissions generally weigh between 100 and 400 pounds (45 to 181 kg), although the type of vehicle can cause this number to be much higher. The key to the transmission is in how it’s designed and functions, which is also related to weight, by transmitting power from the engine to the wheels.

How much does a 4L65E transmission weigh?

The 4L65E transmission has a weight of 194.6 pounds. It’s gear ratios for the first gear, second gear, third gear, and fourth gear are 3.059-to-1, 1.625-to-1, 1-to-1, and 0.0696-to-1, respectively. What’s more, the 4L65E features five-pinion planetary carriers.

How heavy is the average transmission?

You can expect an average transmission weight to be about 100 to 400 pounds (45 to 181 kg) or about 226 lbs (103 kg) for a standard size transmission. Generally, the lighter a transmission is, the higher the performance is, although it depends on the vehicle.

How tall is a 4L60E transmission?

4L60E (1996 and Later)

Style	A	B
All (except Corvette and LS1)	30 3/4 in.	21 3/4 in.
Corvette transaxle
LS1 Style (1998 and Later)	31 5/32 in.	21 3/4 in.

How much HP can a 4L60E handle?

Go with a performance rebuild, you will be looking at about $1600 for a fully built trans that can handle around 600hp.

Can I put a 4L60E in place of a 4L80e?

Swapping from the 4L60E to the 4L80E is not difficult to do in vehicles that were equipped with both transmissions. It’s not the easiest swap to do, and a 4L60E can handle a lot of power on its own.

Does a manual have a transmission?

The basic types of transmission are automatic and manual. The transmission channels the power that is generated by the engine to drive the wheels. Automatic cars shift gears on their own, while manual cars require you to shift gears with the stick shift.

How much fluid does a 4L60E transmission need?

The transmission is 21.9 inches in length. The transmission weighs 146 pounds dry and 162 pounds with the fluids installed. The amount of fluid required depends on the torque converter that it is paired with. With the 9.64” torque converter, 8.4 quarts of transmission fluid is required, while the 11.81” torque converter needs 11.4 quarts of fluid.

How much torque does a GM 4L60E have?

Beginning in 1998 a new 300mm torque converter with improved higher-capacity internals, 300mm style input shaft, and 300mm style pump was also introduced on models coupled to a Gen III Small Block. The 4L60E is rated to handle up to 360 ft·lbf (488 N·m) of torque. It weighs 133 pounds without transmission fluid.

What’s the difference between the 4L60E and 4L80E?

One of the similarities between these transmissions is that both of them are electronically controlled. The bolt pattern for the transfer case is also the same so it will fit in a swap without problems. One thing to consider is that the 4l60e was named th350 and 700r4 before in earlier models and the 4l80e was named th400.

Where is the GM 4L60 E transmission made?

The 4L60E and 4L65E are built at Toledo Transmission in Toledo, Ohio and have also been built at Romulus Transmission in Romulus, Michigan and Ramos Arizpe, Mexico.