Menu Close

How do I fix the red light on my boiler?

Jim Brown

How do I fix the red light on my boiler?

A simple reset could be enough to stop your Vokera boiler from flashing red and get the unit working to heat your home and hot water again. To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’.

How do I reset my Vokera compact boiler?

How to reset a Vokera boiler. If your Vokera boiler needs resetting, you may see a flashing red light. Simply move the mode selector switch to the ‘OFF/RESET’ position, then move it back to where you would normally have it (either ‘hot water only’ or ‘heating and hot water’). If it works, you should see a green light.

Where is reset button on Vokera boiler?

Go to the reset button Mostly the new and updated boilers have the reset button on the boilers display. This will be located where the fault code is being displayed.

What does red light mean on boiler?

fault with
The red light on the display panel indicates a fault with your boiler. The way in which the light is flashing will help indicate the problem. This helps to indicate the exact fault with your boiler (because lights on their own are not specific enough).

How do I know if my boiler thermostat is working?

Boiler Thermostat Testing To confirm that it is most likely a boiler thermostat problem, shut down the system, turn the temperature on your controller down to zero, and do the same with any in-room thermostats if you have them. Turn it on again, but keep your hot water off so you can check the central heating first.

Why is my Vokera boiler not working?

There are many possible reasons why a Vokera boiler will fail to ignite: faulty ignition leads or electrode (needed to make the spark to create the flame), blocked flue or condensate pipe, issue with the gas valve or a printed circuit board (PCB) fault.

Why does the red light keep coming on on my boiler?

Usually, when modern boilers need resetting they will display a fault code or begin to flash a red or green light. These signals indicate that your boiler senses a problem, which is why it has stopped working and needs to be reset.

Can you Repressurise a boiler when it’s on?

The most effective way to fix a problem with low boiler pressure is to repressurise the system. This can usually be done yourself without the need to call a Gas Safe engineer, but you should always check the user guide first to ensure that your model allows this. Turn off the boiler.

Do I need to press the reset button on my boiler?

Often, a boiler can be returned to normal working order by resetting it. This is done by pressing the button or turning one of the thermostats to reset for 3 seconds before turning the stat back up. If your heating isn’t coming on and you’ve checked the power supply and pressure you may need to reset the boiler.

Is there a red flashing light on my vokera boiler?

Hi can anybody help??, there is a red flashing light on my vokera option boiler and no heating or hot water. For a while now the system has shown a yellow light, and I have been topping up the water a couple of times a day, and the yellow light goes out.

Why is the red light flashing on my boiler?

The red light on the display panel indicates a fault with your boiler. The way in which the light is flashing will help indicate the problem. For example, on a Vokera Compact you might see an A01 fault code with a red flashing light, which indicates there has been a failure in the ignition sequence.

Why does my vokera boiler keep going into lockout?

A constant red light on your Vokèra boiler means that the unit has gone into lockout for safety reasons. Some of the possible faults behind this include: Potentially harmful flue gases aren’t being expelled due to an issue with the fan.

How do you reset a vokera hot water boiler?

To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’. Should this reboot get your boiler working again then you’ll know because there will be a constant green light.

How do I fix the red light on my boiler?

Jim Brown

How do I fix the red light on my boiler?

A simple reset could be enough to stop your Vokera boiler from flashing red and get the unit working to heat your home and hot water again. To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’.

What does a flashing red light on a Worcester boiler mean?

What Does A Worcester Boiler Flashing Red Light Mean? The boiler has no gas supply. The gas pressure has dropped too low. The flue is blocked.

Why is the burner light flashing on my ideal boiler?

When your boiler displays a ‘C’ on the boiler screen and the burner light is also flashing, this means your boiler has reached the programmed temperature. If your house has not met the set temperature and your boiler is showing this it could be caused by a circulation problem in the system.

Why is my Baxi boiler flashing red?

1 red flash means there could be temperature, sensor or flow faults. You will need an engineer to locate the issue. 2 red flashes is a sign your boiler has overheated. Try bleeding your radiators before calling an engineer.

Why is my boiler saying reset?

Usually, when modern boilers need resetting they will display a fault code or begin to flash a red or green light. These signals indicate that your boiler senses a problem, which is why it has stopped working and needs to be reset.

What does a red light on a boiler mean?

A constant red light on your Vokèra boiler means that the unit has gone into lockout for safety reasons. Some of the possible faults behind this include: The boiler is overheating; The pump isn’t circulating hot water around the central heating system or to the taps when required;

Why is the blue light flashing on my boiler?

Slowly flashing blue light, and a flashing lockout reset button – This usually means that there is a lockout with the ignition. Make sure that there is gas present and that your boiler is at the right pressure levels. Why is my boiler not igniting?

How can I tell if my boiler is heating up?

This is identified by the Red Lockout light constantly illuminated or flashing. To reset the boiler, simply press the reset button until the red light goes away. If your timer is calling for heat, the burner light will come on to indicate the boiler has fired up and is heating your system.

How can I tell if my boiler is locked out?

In certain circumstances, your boiler may lock out. This is identified by the Red Lockout light constantly illuminated or flashing. To reset the boiler, simply press the reset button until the red light goes away. If your timer is calling for heat, the burner light will come on to indicate the boiler has fired up and is heating your system.