Menu Close

What does F1 mean on a Kenmore dryer?

Jim Brown

What does F1 mean on a Kenmore dryer?

The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.

What does Error F01 mean?

The F01 error code means the primary control unit in the dryer has failed and will have to be replaced. The control that needs replacing is the electronic control board not the user interface and/or control panel.

Where is the reset button on a Kenmore dryer?

Is there a reset button on the machine? There is no reset button on your dryer. I recommend locating the two (2) house circuit breakers dedicated for the dryer and reset both circuit breakers by flipping them both OFF and ON 2-3 times and then check to see if the dryer will start.

How do you reset a Kenmore Elite dryer?

To reset, unplug for 5 minutes. In another section for the same situation you say to hit the stop button 2x n then the power button. My he3 has no stop or power button. To re-set the motor on a newer washer, unplug then plug the machine back in again.

How do I fix F01 error?

Whirlpool Duet Dryer F01 Error Repair Instructions The Whirlpool Duet Dryer F01 error may be able to be fixed with a simple reset of the main control. Unplug the dryer for 1 minute and plug it back in this will reset the control if the error persists after that you will need to check the dryer thermal fuse.

Why does dryer say F1?

How do I turn off the control lock on my Kenmore dryer?

The control lock is turned on or off by pushing and holding the drain/spin button for 3-5 seconds.

What does F01 mean on a whirlpool dryer?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes.

What does F01 mean on Kenmore Elite He3 dryer?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging the washer back in, then the… – Kenmore Elite HE3 Dryer

What is the error code on a Kenmore dryer?

Sears Kenmore Dryer Model HE3 – F01 Error Code. Main Circuit Board Repair – Electronic Control Board Repair or Replacement UPDATE: The repair has been working for almost 4 years as of DEC18. Loading…

What does F1 mean on Kenmore Oasis dryer?

The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer.

What does F1 mean on a Kenmore dryer?

Jim Brown

What does F1 mean on a Kenmore dryer?

The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.

How do I reset my Kenmore error code?

You will need to remove the power supply to the washer to reset the code.

  1. Look for the “Pause/Cancel” button on the washer control panel.
  2. Press the “Pause/Cancel” button twice to cancel the wash cycle.
  3. Connect the water supply hoses back to the washer and turn on the water spigots.

What does the error code f-01 mean on my Kenmore front load dryer?

Click to remove this tagging. The F-01 error code indicates a primary control board failure on this model of dryer. If the error cleared after unplugging it for a while, then the control board could have received a power surge or glitch through the electrical lines.

What causes the Whirlpool duet dryer F01 error code?

In most cases its not the fuse causing the F01 error code but it’s worth checking because in some rare cases it can be and it’s a $20.00 part VS a $200.00 part. To check the thermal fuse remove the bottom access panel off the front of the dryer and you will see the fuse mounted at the top of the blower wheel housing.

What is the error code on Kenmore H3 dryer?

The part is # W10174745 for Kenmore H3 electric dryer. Apparently it is a Whirlpool part made for a Kenmore dryer. Answered! View the answer I have this problem too Is this a good question? The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines.

What does it mean when your dryer says F1?

Hold the “Start” and “Cancel” buttons down for 15 seconds to reset the error code. Remove any clothes from the dryer before proceeding with repairs or diagnosis. The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out.