What drywall do you use for ceilings?

5/8-Inch-Thick Drywall When installed on ceilings, 5/8-inch-thick panels are less susceptible to sagging between the joists than 1/2-inch panels. Adding popcorn texture or another type of heavy surfacing material can add to the weight problem, making 5/8-inch drywall a better choice for ceilings.

Can you use 3/8 drywall ceiling?

3/8 Drywall on Ceiling Joe, yes you can use 3/8-inch drywall on ceilings like this. It’s the BIBLE of everything drywall and plaster. In this great book you’ll find the minimum recommendations for installing 3/8-inch drywall, including fasteners, spacing, etc.

Do ceilings have to be 5/8 drywall?

5/8″ Type X is most commonly used for ceilings due not only for its rigidity (no sagging), but also its fire-resistance and acoustical blocking. You’ll certainly want to use at least 2-inch drywall screws to hang it. Not sure adhesive is necessary or recommended unless you are covering existing drywall.

Is there a difference between ceiling drywall and regular drywall?

Drywall and sheetrock are really the same thing. Drywall is a panel made of gypsum plaster pressed between two thick sheets of paper. Sheetrock is a brand of drywall patented by the US Gypsum Company. Both are used to make walls and ceilings.

Can you use 1/2 inch drywall ceiling?

1/2-inch: Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. When installed on ceilings, 5/8-inch-thick panels are more resistant to sagging than 1/2-inch panels.

Is lightweight drywall good for ceilings?

There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.

Can you put drywall over existing ceiling?

Things You’ll Need For a ceiling that is cracked and possibly stained, a good method is to re-cover the entire ceiling with a new layer of drywall. By re-covering the entire surface of the ceiling it allows you to basically start over to achieve that nice smooth and even surface you want.

Is moisture-resistant drywall required by code?

The surfaces of tub and shower surrounds are required to water resistant. Technically, the building code does allow water resistant sheetrock installed on ceilings of tubs and showers, but it must be nailed to ceiling joists that are spaced no more than 12″ apart.

How far can you span drywall on ceiling?

The general rule of thumb is that drywall can span up to 24 inches horizontally without support. This allows you to make a small soffit up to that wide without any framing.

Should I sheetrock the ceiling or walls first?

Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level. Irregularities less than 1/8 in.

Can you use 5 / 8 inch drywall on a ceiling?

Though the 5/8 inch dry walls used for ceilings are heavy, they rarely sag and can also be adopted for the walls. However, not everyone uses the thickest drywalls on the interior of their house as some people prefer to use the ½ inch drywall. This type comes recommended for walls that have studs placed up to 16 inches in the center.

What’s the average thickness of a ceiling panel?

Ceiling Drywall Thickness and Width The panels of drywall usually come in 4-foot-wide sections, which can be cut to suit the dimensions of the space you’re finishing. For residential spaces, drywall panels can be 3/8 inch thick, a quarter-inch thick, or half an inch thick. Some types of drywall can be as thick as 5/8 inch.

What is the most common thickness of drywall?

The most common thickness of drywall used in residential interior construction is 1/2 inch. This material is recommended for walls with studs placed 16 inches on center. If the wall studs are placed 24 inches on center, a 5/8-inch drywall is recommended.

How big of a screw do I need for drywall?

Screws that measure 1-1/4 inch in length are appropriate for sheets of drywall that are 3/8, 1/2 or 5/8 of an inch thick, while screws that measure 1-3/8 inches are meant for sheets of drywall up to ¾ of an inch thick.