Menu Close

Where do I find my AquaLink device number?

Jim Brown

Where do I find my AquaLink device number?

Enter the iAquaLink device number found on the door hanger or the device itself.

How do I program my AquaLink rs8?

Basic Programming: To set a particular piece of equipment to turn on and off at a predetermined time, press the MENU button, press the forward arrow button to scroll to the PROGRAM menu, press ENTER, and then press the button for the equipment that you want to program.

How do I change my iAquaLink WiFi?

After clearing the WiFi settings and with the Wired/WiFi switch set to WiFi, use a smartphone or WiFi enabled device to go to WiFi settings. Connect to the network labeled iAquaLink. iAquaLink will display the networks it detects, as well as signal strength. Select the network iAquaLink should use.

How do I reset my iAquaLink 2.0 WiFi?

Inside the iAquaLink 2.0, toggle the WiFi – Wired switch to clear the Wi-Fi settings and put the iAquaLink in desired setup mode. 3. After clearing the WiFi settings and with the Wired/ WiFi switch set to WiFi, use a smartphone or WiFi enabled device and go to WiFi settings.

Why wont my AquaLink connect?

If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi. This will restart setup mode so you may attempt to connect it to your eero network again.

How much does AquaLink cost?

3 PRODUCTS TO CHOOSE FROM

Model # Item Price
7956RLY Jandy Aqualink RS6 One Touch Control System **Free Shipping** $1,574.99

How does iAquaLink work?

The iAquaLink app lets you monitor and adjust all equipment controlled by the Jandy AquaLink pool control system. The iAquaLink 3.0 Web Connect Device communicates with your internet router, which allows you to control your pool and spa from anywhere in the world, 24/7 via the iAquaLink app and any smart device.

What does it mean when iaqualink is connected to WiFi?

If the iAquaLink LED turns green, it’s successfully connected to the WiFi. After clearing the WiFi settings, by physically toggling the WiFi-Wired switch to Wired then back to Wi-Fi, use a smartphone or WiFi enabled device to go to WiFi settings and connect to the network labeled “iAquaLink”.

What do I need to do to set up iaqualink?

Select the network iAquaLink should use. If prompted for a password, enter the password for the home network (case sensitive). iAquaLink will disconnect from the smartphone at this point. If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi.

How do I connect my iaqualink J-box to my computer?

Locate the WiFi/Wired switch and ensure it is in the WiFi position. Using a USB cable, connect the iAquaLink J-Box to an internet enabled computer. Download the WiFi Set-up tool below and follow the directions.

What’s the difference between iaqualink 2.0 and 1.0?

People already using iAquaLink will enjoy all the same benefits that iAquaLink 2.0 users will enjoy. iAquaLink 2.0 contains Wi-Fi communication enhancements making it easier to connect iAquaLink to home Wi-Fi networks.

Where do I find my AquaLink device number?

Jim Brown

Where do I find my AquaLink device number?

Enter the iAquaLink device number found on the door hanger or the device itself.

How do I reset my iAquaLink password?

Note that if you have an invalid or non-working email address, you will not be able to reset your password and will need to call our Customer Experience team at (800) 822-7933 to reset your account.

Can’t connect to iAquaLink?

If the process fails, the iAquaLink device will need to have its memory cleared by physically toggling the WiFi-Wired switch to Wired then back to WiFi. This will restart setup mode so you may attempt to connect it to your eero network again.

How do I set up iaqualink on my phone?

After clearing the WiFi settings and with the Wired/WiFi switch set to WiFi, use a smartphone or WiFi enabled device to go to WiFi settings. Connect to the network labeled iAquaLink. iAquaLink will display the networks it detects, as well as signal strength. Select the network iAquaLink should use.

Can you use an Aqualink controller with iaqualink?

If you already have an AquaLink control system with other physical interfaces (touch pads, control panels, wireless remotes, etc.), you can continue to use them with iAquaLink. With AquaLink RS systems, iAquaLink can be used with other controllers, or as the only interface.

How to restore power to the AquaLink system?

Pass the iAquaLink cable through the low voltage raceway of the AquaLink. Reinstall the dead panel (and/or close doors if applicable) to ensure high- voltage areas are secured. Connect iAquaLink to the RS485 4-wire connector on the power center board of the AquaLink. Restore power to the AquaLink system. 3

What kind of cable do I need to connect iaqualink?

Up to 100 ft. (30m) of 4-wire (22 AWG / 0,5 mm² solid copper) cable can be used to connect the iAquaLink device to move it closer to the home’s router. Use one continuous cable—DO NOT splice. A wireless access point can be added to the home’s network (available at most electronics stores)