Contents
Does Clorox Xtra Blue Shock have chlorine?
Available Chlorine: 39%.
Can I use Clorox pool and spa shock Xtra blue in my hot tub?
They responded – “This product is not designed to be used in hot tubs. The ‘Spa’ in the name is part of the brand but not the product.” This is quite unfortunate as there should be chemical composition difference between shock for pools and hot tubs.
How do you shock a pool with Clorox?
Now you can know the gallons of bleach you would need to shock your pool as follows: use 0.5 gallons of Clorox per 10K gallons of water to increase the level of chlorine by 5 ppm. If you want to raise the level of chlorine by 2.5 ppm, then you would need ¼ gallon of the product per 10K gallons of water.
How long can I swim after Clorox shock?
Re-Entry: Wait at least 15 minutes after product application before entering pool (Test chlorine level prior to re-entry. Re-entry into treated swimming pools is prohibited above levels of 4 ppm chlorine due to risk of bodily injury). Enter when chlorine level is 1-4 ppm.
How much Clorox pool shock Xtra blue do I use?
Dosage: When/How to Use: 1 lb per 12,000 Gal: To Shock Water Clear and Destroy Organic Contaminants (Body Oils, Sweat, Lotions & Urine): Broadcast in pool’s deepest area with filter and pump on. Run filter and pump for 4-8 hrs.
Can you put Clorox in your pool?
When chlorinating wading pools, use 1/8 cup per 100 gallons of new water. Mix required amount of Clorox® Regular Bleach2 with 2 gallons of water and scatter over surface of pool. (Clorox® Regular Bleach2 will not harm plastic pools.) Do not reenter pool until the chlorine residual is between 1 to 3 ppm.
How much Clorox shock should I put in my pool?
How much shock should I use? To shock your pool, use 2 pounds of shock for every 10,000 gallons of water, which should raise your chlorine to 10.0 ppm. Depending on your pool, you can use Leslie’s Power Powder Plus or Leslie’s Chlor Brite.
Can you use Clorox pool shock in hot tub?
You never want to use bleach in place or regular chlorine or bromine sanitizing, but you can use bleach to occasionally shock your hot tub water and use diluted bleach to clean the shell of an empty hot tub. Just avoid using liquid chlorine designed for swimming pools.
Is Clorox pool shock the same as chlorine?
1) What is the difference between chlorine and shock? Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
Is it safe to use Clorox shock Xtra blue?
It also has a small amount of copper, which can build up and cause staining of your pool and hair. Avoid the entire XTraBlue line from them. 3 Share ReportSave level 2 · 4y Xtra Blue means soon to be Xtra green and stained 4 Share ReportSave level 2 · 4y I have a case of Xtra Blue 3″ tabs.
When to use Clorox pool shock in pool?
This shock clarifies the water and leaves it clear and extra blue, just as it should! Works fast, too. I like to use it between my professional pool cleaning appointments when the hot TX sun burns up the chlorine in the pool before the next visit.
What does Clorox granular sanitizer do in a pool?
Dual action granular sanitizer and shock. Clears cloudy water. Kills bacteria with 99% Trichlor. For insanely clear water. Kills bacteria and stops all types of pool algae. Clears cloudy water and fights algae. Kills and prevents green, mustard and black pool algae.
Why is Clorox Xtra blue not good for algae?
They are both borate products and we know that borates inhibit algae growth, but they chose not to advertise that in order to keep the exact formula to themselves. Also, Yippee is right, anything that has “Blue” in the name likely contains copper. Unless there is an ingredient list showing otherwise you will want to avoid it.