Menu Close

Can Warmboard be installed over concrete?

Jim Brown

Can Warmboard be installed over concrete?

Warmboard–R is typically installed over concrete or subfloor, though is also used in walls and ceilings. Non-aluminum filler panels are also available. Warmboard panels are but one component in a complete radiant system.

Is radiant energy cheap or expensive?

Like any type of electric heat, radiant panels can be expensive to operate, but they can provide supplemental heating in some rooms or can provide heat to a home addition when extending the conventional heating system is impractical.

How thick is Warmboard?

1 1/8″
Warmboard-S is a structural radiant panel that is 1 1/8″ thick, made of Douglas Fir 7 ply plywood, and is sold in full-faced tongue and groove 4′ x 8′ sheets. Warmboard-R is a radiant panel that is 13/16″ thick, made of aspen and pine-oriented strand board (OSB) and is sold in square edged 2’x 4′ panels.

How much does warmboard cost per square foot?

With Warmboard, or any radiant solution, the total cost, including all materials and labor, is between $10-$15 per square foot installed. Warmboard itself is about half that. Click to see full answer Also to know is, can Warmboard be installed over concrete?

Which is more expensive warmboard or radiant system?

Compared to other radiant systems, Warmboard is among the more expensive options, just as any luxury good costs more than a lower grade choice. However, while Warmboard has a higher product cost, it also has much lower labor and material costs.

Are there any downsides to using warmboard?

The warmboard uses aluminum on the bottom UNDER the plywood and loses in passing the heat thru the ply. Everything that I’ve seen shows the aluminum on the top of the panel. Other than cost, the biggest downside that I see is if it gets wet, it would be very slick.

What’s the difference between warmboard’s and warmboard R?

Warmboard-R is a radiant panel that is 13/16″ thick, made of aspen and pine-oriented strand board (OSB) and is sold in square edged 2’x 4′ panels. Warmboard-S is typically used in new construction, while Warmboard-R is most commonly used in remodels.

Can Warmboard be installed over concrete?

Jim Brown

Can Warmboard be installed over concrete?

Warmboard–R is typically installed over concrete or subfloor, though is also used in walls and ceilings. Non-aluminum filler panels are also available. Warmboard panels are but one component in a complete radiant system.

Does Warmboard replace subfloor?

Perfect for new homes, Warmboard-S installs directly over joist or slab. Yes – the same labor, skills and tools used to install a subfloor can be used to install Warmboard-S.

How much is heated flooring per square foot?

Hydronic or water-based radiant heated flooring costs between $6 to $20 per square foot. Electric-based radiant floor heating runs between $8 to $15 per square foot. Both range in cost from $1 to $5 a day to run.

How does Warmboard work?

A radiant panel works by conducting heat from water in a tube to the surface of your floor and into your home. It’s that simple. This is why conductivity is the single most important thermodynamic property of a radiant system. Warmboard is engineered to take the maximum advantage of the laws of thermodynamics.

How thick is Warmboard?

1 1/8″
Warmboard-S is a structural radiant panel that is 1 1/8″ thick, made of Douglas Fir 7 ply plywood, and is sold in full-faced tongue and groove 4′ x 8′ sheets. Warmboard-R is a radiant panel that is 13/16″ thick, made of aspen and pine-oriented strand board (OSB) and is sold in square edged 2’x 4′ panels.

Can radiant heat be installed under subfloor?

Radiant heat can be added under your existing floor. In this situation, hydronic radiant heat (water circulating through pipes) would be easier to install than electric mat radiant heat. Electric mat radiant heat is best when sandwiched between the subfloor and the finish material, be it wood, tile, or carpet.

Does in floor heating save money?

Radiant heat provides warmth from the floor up throughout the room without any cold spots or stuffiness in the area being heated. Radiant heat provides an average saving of 15% on heating bills thanks to the efficient way it warms a home.

How much does it cost to install warmboard flooring?

Used with radiant heat hydronic systems, Warmboard costs about $7 per square foot or $2,142 for a 306-square-foot room. Adding radiant floor heating costs between $1,750 and $6,000.

Which is more expensive warmboard or radiant system?

Compared to other radiant systems, Warmboard is among the more expensive options, just as any luxury good costs more than a lower grade choice. However, while Warmboard has a higher product cost, it also has much lower labor and material costs.

How much does ecowarm cost per square foot?

$2 per square foot is actually the approximate difference in cost between Warmboard and Ecowarm RadiantBoard. Click to see full answer. Then, is Warmboard worth the price? Compared to other radiant systems, Warmboard is among the more expensive options, just as any luxury good costs more than a lower grade choice.

How big does a warmboard panel need to be?

Warmboard-R is our radiant heat panel designed specifically for retrofits and remodels. It is a 13/16” thick radiant panel that provides unmatched response, energy efficiency and comfort. Warmboard-R panels measure 2’x4′, and are ideal for installing over existing subfloor or slab.