How do you reset the change oil light on a Ford Taurus?

How do you reset the change oil light on a Ford Taurus?

HOW TO RESET: FORD TAURUS

1. Turn the Ignition to RUN Position or Ignition On.
2. Press the “SETUP”, “OIL LIFE % HOLD RESET = NEW” will be displayed.
3. Press and hold “RESET” button for 2 seconds to reset to 100% and “OIL LIFE SET TO 100%” will be displayed.
4. Turn Ignition OFF. Oil Reset is complete.

How do you reset the change oil light on a 2002 Ford Taurus?

How to Reset Ford Taurus Oil Life Percentage:

1. Press and release the SETUP button to display “Oil Life XXX% Hold Reset = New”
2. Press and hold the RESET button for 2 seconds and release to reset oil life to 100%

How do I reset my dash after oil change?

Hold the Reset Button and Turn the Key

1. Press and hold the reset button.
2. Turn the ignition back to the ON position while holding the reset button.
3. Watch the oil change or maintenance light carefully.
4. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

How do you reset the oil light on a 2013 Ford Taurus?

The 2013 ford taurus oil can be reset by putting the ignition on, without starting. Scroll through the steering wheel settings to vehicle, and select and hold “oil life reset” till it resets.

Where is the oil sensor on a 2002 Ford Taurus?

On 3.0L DOHC engines the sensor is located on the left side of the engine block above the oil filter. On 3.4L DOHC engines the sensor is screwed into the oil filter adapter.

How do I clear my dash warning lights?

How to Reset the Warning Lights on the Dash

1. Open the hood of your vehicle.
2. Loosen the nut that holds the negative terminal to the battery with the pliers.
3. Completely remove the cable from the negative battery terminal.
4. Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.

How to reset the oil soon light on a Ford Taurus?

To reset the Change Engine Oil Soon Light on the Ford Taurus, conform to the following instructions: Hit the SETUP button twice. it should say “Oil life remaining XX%” on the info “screen” below your tachometer. If you’re on that screen, hold the RESET button. It will reset your oil life monitor and turn the change oil soon reading off.

How do I reset the oil change light?

Turn the vehicle in the ON position. Press and release the TRIP/RESET button until “Setup Menu hold Reset” is displayed. Press and hold the TRIP/RESET button until “System Check” is displayed.

How do I reset the oil light on my Ford Expedition?

Press and release the TRIP/RESET button to scroll through the menu items until “Hold Reset If New Oil” is displayed. Press and hold the TRIP/RESET button until “Oil Life Set To 100%” is displayed. Release the button and the oil life is now reset.

How do I reset the oil life on my Ford Escape?

Press and release the SETUP button to display “Oil Life XXX% Hold Reset = New”. Press and hold the RESET button for 2 seconds and release to reset oil life to 100%.