Contents
Do you need a camber kit to camber?
When you lower the car, the camber will go out and you need a camber kit to fix it. Most people think they need a camber kit because of a tire-wear concern. The reality is, TOE ANGLE kills tires WAY faster than camber ever will.
Do I need an alignment if I lower my car?
You need to do an alignment after the car is dropped, not necessary but I wouldn’t wait longer than a month. Not having alignment done for a prolonged period after the car is dropped will lead to drastic tire wear on the inside, something that isn’t noticable on the inside.
Why do you need a camber kit?
The camber kit has eccentric bolts that have one side shaved off and washers that fit them making it possible to adjust the camber as you’re turning the bolt. If you change the height of the vehicle it could be needed or if the alignment is not within specs.
Can you camber with lowering springs?
If you lower your vehicle one inch front camber can change by approximately -. By lowering a vehicle two inches your front camber change will be approximately -1.50 degrees. When you lower a vehicle three inches you will change front camber approximately -2.50 degrees.
Does lowering a car affect camber?
One of the byproducts of lowering a vehicle can be an increase in the amount of negative camber. Having a lesser degree of camber helps with tire wear and is the primary cause for camber correction.
Do you have to get an alignment when you get lowering springs?
Myth 2: I will need an expensive alignment kit if I install lowering springs on my car. Fact: According to Eibach, a leader in spring engineering and production, most vehicles do not require an alignment kit after installing a set of lowering springs that result in mild lowering of about an inch.
Why do I need a camber kit for my car?
Camber kits are used to correct wheel alignment on lowered vehicles, or to provide camber adjustment for tracked vehicles which require slightly negative camber. Correcting the camber on a vehicle is important for even tire wear and maximum traction. You want to keep your camber at the manufacturer’s suggested alignment setting.
Are there any cars that have no camber?
At first glance it would be easy to think that all vehicles have zero camber, the wheel is set straight up and down. This is actually not true. While as subtle as it may be, vehicles will have at least a little negative camber if setup properly.
What does zero camber mean on a car?
Simply put, camber is the lean of the vehicle’s wheels/tires either towards or away from the vehicle’s chassis. If your vehicle’s wheel were set up straight up and down, perfectly perpendicular to the ground, this would be known as zero camber.
Can a camber plate be used to adjust suspension?
Because the suspension is located by individual control arms managing their own individual alignment curves, camber plates would do little to nothing to adjust static camber effectively. Furthermore without the benefit of the massive adjustment tie rods provide, toe adjustment is typically limited.