Contents
How big is a chain link fence post?
Chain link line posts are typically 2-1/2′ longer than the height of fence being installed for commercial, i.e. a 6′ high fence has 8’6″ long line posts.
What is the diameter of a metal fence post?
Tip: Posts come in two diameters. The wider diameter, 2-3/8 inches, is for corner and end posts. The smaller diameter is 1-5/8 inches and is for the other posts in the fence, or line posts.
How deep do you bury chain link fence posts?
Dig 6-inches to 8-inches for end and corner posts. Dig 4-inches to 6-inches for line posts. Make the holes a third of the length of the pole length plus 4-inches for gravel. Fill all the holes with 4-inches of gravel.
How deep should a 8-foot fence post be?
about 2 feet deep
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
Does chain link fence decrease property value?
Chain-link fencing may not raise your property value, but you can purchase fencing materials from Shur-Way Building Center in Vancouver, WA no matter what your fencing needs are! A typical chain link fence isn’t going to do much for your home’s market value.
How big of a hole do you need for a chain link fence?
Measure the distance between terminal posts and refer to Post Spacing Chart to determine the distance between line posts. Dig line post holes 6″ wide and 18″ to 24″ deep, with sloping sides (Fig. 4). Center the line posts in the holes. Make sure the posts are plumb, aligned with the centers of terminal posts, and set at the correct height.
How to calculate the height of chain link fence posts?
Calculate the height of the terminal posts to be installed: 1. Measure the height of the chain link fabric. Add 2″ to allow for attachment of the rail band and cap. 2. This measurement is where the ground will line up with the post.
How many tension bars do you need for a chain link fence?
Space line posts equidistant at intervals not exceeding 10 feet. As required (2 for each gate) Tension Bar 1 for each end post 1 for each gate post 2 for each corner post 10 13 12 11 TOOLS YOU WILL FIND USEFUL
Do you have to use concrete for chain link fence posts?
Installing a Chain Link Fence with Concrete. Whether you use concrete or not, installing a chain link fence yourself requires several tools and materials, including fence posts, gates, chain link mesh, fasteners, tension bars and wires, post-hole digger, power auger, hacksaw or pipe cutter, shovel, line level, mason’s line, plumb bob,…