How much can you cut off Levolor blinds?
Up to 72 in. * For inside mount only.
Can you shorten Levolor blinds?
If you have Levolor Cellular blinds and not slat blinds, adjust the length by lightly pulling down on the bottom rail to lengthen the blinds or pushing up to shorten them. Levolor blinds are similar to other manufacturers’ window treatments in that they may need length adjustments, even if they are custom fit.
Can you cut vertical blind headrail?
Your headrail is manufactured using a high quality metal that can be easily cut to reduce the length if required. is latest safety designed want control unit allows you to easily draw and rotate the panels to the required side.
What’s the best way to cut window blinds?
Subtract 1/4-inch from each side to ensure the blinds have room to move up and down. This small gap will keep your blinds from getting cut or stuck on the windowsill. Measure the blinds from the head rail and use a pencil to mark your new desired length. Use the measurement found above and mark the headrail (the top of the blinds) at this length.
How to cut a blinds with a hacksaw?
1 Remove the metal end stiffener bracket from the side (s) you are cutting. 2 Use the hacksaw or tin snips to cut the headrail per your measured mark. 3 File any rough edges with a metal file. 4 Replace the metal end stiffener onto the newly cut headrail.
How do you cut the head rail of a window?
Cutting the Head Rail Measure the width of the window to determine the necessary width of the blinds. Typically, a set of inside-mount blinds should measure about 1⁄2 inch (1.3 cm) less than the width of the window frame. Mark the smallest measurement, and cut to this.
How do you determine the width of window blinds?
Measure the width of the window to determine the necessary width of the blinds. Typically, a set of inside-mount blinds should measure about 1⁄2 inch (1.3 cm) less than the width of the window frame. Make sure you measure the inside of the frame, where the blinds actually fit, and not the entire window frame.