Contents
How do I update my Actron scanner?
Double click the Scanning Suite Launchpad icon on your desktop to open Scanning Suite. If you do not have the icon on your desktop, you can find it by going to Start Menu/All Programs/Scanning Suite/Actron. 2. Click Tool Update.
How do I update my Actron cp9175?
– Press and hold any button of NX501 scanner before connect the unit to your computer, make sure the screen is displayed “Update Mode” then released. Open the updating software UPLINK, click the “Check Update”, the intelligent software and device will finish its update process on its own.
What is Actron scanning suite?
Software updates are performed using the Scanning Suite application. Scanning Suite can also be used to print diagnostic information stored in the tool. NOTE: An update for more than one product may appear in the Scanning Suite Version List.
Can Actron CP9180 read ABS codes?
No, the Actron CP9180 is an older model scan tool that cannot read ABS and Airbag codes. If you need a tool with this feature, the Actron CP9680, CP9690 and CP9695 all read and erase ABS and Airbag codes for many vehicles.
How much does it cost to update Launch X431?
If you are looking for update for your Launch X431 scan tool after 2 years,we will tell you the update cost $495.
What is the best Actron scanner?
Best Actron scanner comparison chart
| Editor’s Picks | Product | Our Rating |
|---|---|---|
| Best Overall | Actron CP9670 | 9.5/10 |
| Runner Up | Actron CP9690 | 9.5/10 |
| Best Budget Buy | Actron CP9125 | 8.5/10 |
How can I update my Actron autoscanner software?
Arrow down to Tool Information and press ENTER The SWID displayed is the software version in your tool Software updates are performed using the Scanning Suite application. Scanning Suite can also be used to print diagnostic information stored in the tool. Click the links below to download the Scanning Suite software and instructions.
How to update the Actron cp9175 Tool update?
Plug the CP9175 into an OBD II vehicle and turn the key to the ON position From the Diagnostic Menu arrow down to System Setup and press ENTER Arrow down to Tool Information and press ENTER To determine the software version of your tool and for update instructions/update files, please see the CP9185 Tool Update page
Why does Actron scanning suite not see USB connection?
From you post it appears that Actron scanning suite does not see USB connection. Which operating system is installed on the computer? to the device” message. If this occurs, try using a different USB port or Open Device Manager to e nsure the drivers are properly installed and a virtual COM port was created for the tool.
How to update autoscanner Plus on Windows 10?
Use the provided USB cable to plug the tool into the PC via the USB port. 2. In the Main Menu, arrow down to System Setupand press ENTER. 3. In the System Setupmenu, arrow down to Program Modeand press ENTER. 2 Updating the AutoScanner® Plus