Contents
How long should a hydrocollator pack be utilized?
Then the pack is applied to the affected body area and left in place for 15 to 30 minutes. New packs need to be soaked for at least 20 minutes. They can be stored in the hydrocollator after use. They should not be allowed to dry out or placed in the microwave due to the mineral content.
Can hydrocollator packs be microwaved?
Microwave Preparation As with stove-top preparation, soak the hydrocollator pack overnight. Place the hydrocollator pack in a microwave-safe container or bowl. Cover the hydrocollator pack with hot tap water, and put the bowl in the microwave.
How often should a Hydrocollator be cleaned?
The interior of the unit should be cleaned, at least every two weeks, using a low abrasive bathroom cleaner with a soft cloth or green, blue, or white Scotch-Brite™ type scouring pad. Always unplug the unit before changing the water.
Can you put bleach in a Hydrocollator?
The Hydrocollator Heating Unit was designed to heat water and HotPacs only. To avoid potential for rusting. 1. Do not use bleach or cleaners with high chloride content.
What is inside a Hydrocollator pack?
Hydrocollator Packs are a combination of bentonite clay and other natural fillings. These bentonite clay packs applied externally are used to alleviate inflammatory pain, joint pain, arthritis, congestion, bruised tissue, and strains.
How long do rice heat packs last?
The temperature and duration both depend on the size of the product and how well it is insulated during use. A standard size hand warmer can last for about 45 minutes. Larger packs can last for at least that amount of time.
What’s the best way to heat a hydrocollator pack?
Soak the hydrocollator pack in water overnight to hydrate all the material cells. This will help the pack last longer and hold its heat longer. Place the hydrocollator pack in a large stainless-steel or enameled pan. Cover the hydrocollator pack with hot tap water and turn on the stove.
How long to soak hydrocollator pack in water?
Turn down the stove, and allow the hydrocollator pack to sit in the water for a minimum of 20 minutes—or until it cools to approximately 160 degrees Fahrenheit—before using. . As with stove-top preparation, soak the hydrocollator pack overnight. Place the hydrocollator pack in a microwave-safe container or bowl.
Why do you need a hydrocollator steam pack?
Hydrocollator steam packs provide an easy and effective way of treating an area with moist heat therapy. Use steam packs to relieve minor muscle aches and pains and as an effective first-line treatment. Hydrocollator packs make excellent heat sources because they hold their heat for an extended period of time.
Can a hydrocollator be used in a microwave?
As you would have it with all medical equipment, hydrocollator and packs require maintenance. First of all, after use, you should place the pack in a microwave to prevent it from drying up completely. Allowing them to dry can destroy the mineral content present thus reducing its efficiency.