Contents
How much heat does a 400 watt metal halide produce?
For instance a 400 Watt Metal Halide High Bay lamp puts off 1,364 BTUs per hour vs. a 150 Watt LED High Bay puts off 511 BTUs/hr. If you have 100 High Bay fixtures that burn for 18 hours per day, that’s 896 Million BTUs vs.
Are metal halide lights dangerous?
Broken and unshielded high intensity metal halide and mercury vapor light bulbs continue to cause eye and skin injuries, particularly in school gymnasiums.
What is the average life of a metal halide lamp?
Metal Halide lights have an better lifespan relative to old technology like incandescent lights but they have a short lifespan compared to LED. Typical lifespan values range from 6,000 hours to 15,000 hours before a bulb requires replacement.
How much heat does a 250 watt bulb produce?
How hot will a 250 watt heat lamp get? The main factors that will help you determine how much heat your heat lamp will produce will depend on its efficiency and wattage. Therefore, if the heat lamp you purchase has 250 watts with a 10% lighting efficiency, it means that the amount of heat it produces is at 225 watts.
Do HPS bulbs get hot?
HPS lights aren’t significantly more hot than LEDs or even CFLs by nature; the problem is that most HPS lights use a high amount of wattage. This means that even the smaller end HPS (400 watts) is still producing the same or less heat than a grower using 23 small CFLs(26w), or 4-5 UFO type LED panels.
Can you put a metal halide bulb in a regular light fixture?
Like fluorescent lights, metal halides require a ballast to provide high starting voltages and to regulate current inside the bulb during operation. This is why a metal halide bulb will not work in a standard household lighting fixture — aside from the fact that the larger E39 base will not fit.
When should a metal halide bulb be replaced?
MH (Metal Halide) bulbs need to be replaced every 8 months on a 18 hour on 6 hour off cycle. MH bulbs lose 40% output in a year, so you lose around 40% yield. Problems like the light going on & off with power outages make the life of the bulb even shorter.
Can you replace metal halide bulbs with LED?
Light-emitting diode (LED) technology advancements now allow you to retrofit your metal halide lamps with a simple bulb change. LEDs can give you comparable lumens at a fraction of the energy cost. They are also longer-lived and show a lower reduction of performance over their service life.
How does a metal halide light bulb work?
The current is passed between two electrodes and this heats up the metal halides (metal and halogen compounds). As the metal compounds heat, they ionize resulting in varying types of light depending on the types of compound present.
Why is there a shortage of metal halide light bulbs?
The culprit was believed to be HID metal halide bulbs which drew too much power and resulted in the shortage. After the incident, the bulbs were updated with $1m worth of LED light bulbs. This is because LED light bulbs are: Safer – they won’t blow like HIDs and contain no mercury.
What can I use to replace a metal halide lamp?
To replace one MH lamp usually requires multiple fluorescent lamps to produce the same amount of light. This 120 watt corn lamp can replace a 400 watt metal halide lamp. As the newest kid on the lighting solutions block, there has been much excitement regarding LED lighting.
Is there such thing as a white halide light?
Metal halide lamps are great because of their vivid white “natural” light that they emit. With LEDs, there really is no such thing as “white light”. You have to use a number of different colors to eventually get white light. This means sometimes the light can be too blue.