Contents
How do you make a simple paper basket?
Method 1 of 2: Simple Construction Paper Basket
- Prepare strips of paper to weave your basket.
- Weave the base of your basket.
- Fold up the strips sticking out the sides of the basket.
- Weave a strip of colored paper between the now vertical strips of the base, folding it to fit around the corner of the basket.
What are the tools used in making a paper basket?
Tools for Basket Weaving
- Sharp basket scissors.
- Sharp angle or side cutters.
- a good packing tool (flat tip, bent or straight)
- awl.
- spoke weight.
- needle nose pliers.
- knife, shaver or scorp.
- measuring tape.
What are basketry techniques?
There are four different types of basketry methods: coiling, plaiting, twining, and wicker. Some of the terms that are specific to basket weaving include loops, twining, ribs, and spokes.
How do you make paper baskets for kids?
Cut out the circle, and glue it to the center of the star. This forms the bottom of your basket. Fold the rays of the star up at the edge of the circle. Step 4: Tape a beige strip horizontally across the bottom of 1 ray. Weave the beige strip over and under the rays all the way around. Remove the tape, and glue the ends of the beige strip together.
How many strips of paper do you need to make a basket?
To make a simple paper basket, cut strips of paper the same length and width from 3 sheets of paper. Then, weave the base of the basket with 4 horizontal strips and 4 vertical strips.
What’s the best way to weave a paper basket?
Hold any 2 middle strips and weave one over the other one (the strip which is under its previous strip should be woven over). Bring it over the next strip and pull them together by 90 degrees. Step 8: One Corner Done! Now, weave the next strips over and under.
What’s the best way to make a basket?
Center the strip horizontally with respect to the strips you laid out. Using another strip of the same color, weave it through the strips in the opposite way from the first one, so that this one will go underneath the strips that the first one you weaved went on top of. Then slide the strips together, making sure the edges line up.