Contents
How do you reset a VAX Hoover?
To reset, remove the Powered Head from the reach wand/handheld and clear any obstruction. Wait 1 minute before refitting the Powered Head, switch the slim vac on and press the brushbar on/off button.
Why is my VAX flashing red and green?
When the red light is flashing while connected to the charger means the battery is being charged, once fully charged the light turn from red to green without flashing. If the red light is flashing while being use means the battery is low and in need of charging.
If this is the case, unplug the cleaner and examine the brushroll. Any threads or other materials caught round it will prevent it from working properly, so remove them straightaway. Finally, press the brushroll reset button, which is located on the rear of the floor cleaning head.
Why does my VAX cordless Hoover keep cutting out?
If your vacuum motor appears to cut out when it’s warm for a few minutes before restarting, it may be due to the motor overheating. This may be caused by blocked filters. They can become clogged over time from a buildup of dust molecules, preventing less or no cool air to flow into the motor.
Why did my vacuum suddenly stop working?
It might sound simple, but lack of power is often the cause of a vacuum cleaner that won’t work. Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don’t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem.
Why isn’t my VAX picking up?
Your Vax carpet cleaner may not be picking up water because the machine has picked up too much grime, and has become blocked up. Check around the head of the carpet cleaner for anything obvious that might make the suction on the Vax weaker, or look for clumps of hair that could be caught in the bristles.
Why is my VAX blade flashing red and white?
The life expectancy of the battery will vary depending on the usage of the vacuum cleaner. White light flashing – The battery is charging. Red light – The battery is low.
How do you reset a VAX blade battery?
To reset, remove the Powered Head from the reach wand/handheld and clear any obstruction. Wait 1 minute before refitting the Powered Head, switch the slim vac on and press the brushbar on/off button. NOTE: Constant use of the boost mode and brushbar feature will reduce the battery run time.
Why does my vacuum keeps shutting off?
A damaged vacuum hose, clogged motor air filter or bad suction motor can cause the vacuum cleaner to shut off during use. A tripped overload on the vacuum suction motor can shut off the vacuum cleaner during use. If your vacuum has a reset button, push it; if the vacuum seems hot, let it cool off first.
How do you reset a VAX battery?