Menu Close

Why does my Dimplex fire keep turning off?

Why does my Dimplex fire keep turning off?

A buildup of dirt or dust can cause the heating elements to overheat, and in turn cause the fireplace to turn off. To check if your electric fireplace has excess dust, turn off your fireplace at the wall and unplug it from the socket. Allow the fireplace to cool down before attempting to check for dust or dirt.

How do you clean Opti Myst transducer?

To clean the transducer, remove it from the fire and dry carefully. Once dry, clean with the brush provided with your fire. Water should not be allowed to stand in the tank or sump for more than two weeks.

Can you use Opti Myst fire without water?

What water can I use in my Optimyst fire? Use filtered water whenever possible. Don’t use de-ionised water.

Are Opti Myst fires expensive to run?

How much does it cost to run my Opti-Myst fireplaces? Using the national average of 15.21 cents for kW/ hour, the Opti-Myst Pro 500 cassette costs $0.02/hour and Opti-Myst Pro 1000 cassette costs $0.07/hour with the addition of water costs.

Does Opti Myst cause condensation?

Dimplex Opti-Myst is not for you if: You have a very small space and want to install an Opti-myst fireplace, as it can cause condensation. You want a fireplace, which is connected to a fixed water installation and do not have the opportunity.

What is Dimplex Opti Myst?

Optimyst uses ultrasonic technology to create the world’s most realistic flame effect, with an ultra-fine water mist that mimics flame and smoke.

Are Opti Myst fires noisy?

No it doesn’t make a noise. Periodically you hear the water passing through but this only happens for a couple of seconds and maybe only two or three times during a four to five hour period of the fire being on.

Do Opti Myst fires cause condensation?

Why does my Myst fire keep cutting out?

Down draft from the chimney may disturb the airflow of the element, causing the overheat cut-out to operate. Subsequently, one may also ask, why does my electric fire keep cutting out?

When does Dimplex Opti-myst electric fire shut off?

Discussion in ‘ Appliances ‘ started by Cthom66, 18 Nov 2019 . Hi, this is my first post, any help would be much appreciated. I have a Dimplex Danville opti-myst electric fire, and have an issue with it. When turning on the fire, the bulbs light up, the mist starts coming out, after 20 seconds it shuts off.

Why is my Dimplex Opti myst not producing smoke?

Down draft from the chimney may disturb the airflow of the element, causing the overheat cut-out to operate. Customer: replied 1 year ago. Our fire is the opti-myst , so it’s actually the mist that’s not coming through therefore creating the smoke/flame effect , the fan near the transducer is turning but still no mist

What to do if Opti myst mist control is not working?

-First, adjust the mist effect down on the fire. -If the problem continues, this may be an issue with the mist control and should be rectified by a service engineer. Please fill out our service call request form at the bottom of this page.