What are the eaves in a house?

What are the eaves in a house?

Eaves are the edges of the roof that extend over the side of a building and overhang the face of the wall. The overhang keeps any rainfall away from the walls, whilst the junction where the roof meets the wall is also protected from water ingress.

What is the purpose of an eaves?

Eaves are the part of a roof that projects out horizontally beyond the side of the structure it covers. They can have practical functions, such as to provide shade and protection from rain, as well as aesthetic functions, creating a definite distinction between walls and roof.

What are the three types of eaves?

There are several kinds of eaves, including a closed eave that doesn’t extend far beyond a wall; an open eave that sticks out to a considerable degree; and a flared eave, which curves upward slightly at its outer edge.

What is the difference between an eave and an overhang?

Eaves are located at the down-slope edge of a sloped roof and serve as the transition between the roof and fascia/wall. Overhangs are extensions of the roof beyond the exterior wall (i.e., the joists, rafters, or trusses and the decking they support cantilever past the wall).

Do all houses have eaves?

Contemporary homes may have narrow roof eaves or no eaves at all for a minimal, streamlined look. Buildings with flat roofs usually do not have eaves, but some can have eaves that stick straight out to protect the exterior walls. A home with shallow or no eaves leaves the home vulnerable to water damage and leaks.

Where are the eaves located on a house?

The eaves are the edges of the roof which overhang the face of a wall and, normally, project beyond the side of a building. The eaves form an overhang to throw water clear of the walls and may be highly decorated as part of an architectural style, such as the Chinese dougong bracket systems.

What are the types of eaves?

The four basic types of eaves are exposed, soffited, boxed-in, and abbreviated. Eaves typically include fascia, the material used to close off the ends of the rafters from the elements.

Are eaves and fascia the same?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake.

What is the underside of eaves called?

Soffit
What Is a Soffit? Your roof by necessity, will often times extend over the walls of your home. This overhang can go by a few names, such as the house eaves or the rafters of your roof. The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”.

What is it called where a roof meets a wall?

A headwall is a level junction where a roof meets a wall. This illustration shows proper flashing at a headwall condition. Headwall flashing should extend up behind the exterior wall covering and down over the roof-covering material, as you see here.

What do you need to know about eaves windows?

The construction and fixings used for eaves windows are all different and specific to each project. Contact IQ Glass for more information. Eaves Windows for Commercial Projects. Eaves Windows can be used on commercial and non-residential projects to maximise the natural light into the buildings on the top floor.

What should the width of the eaves be?

The width of the eaves on north facing windows should be 45% of the height measured from the bottom of the window to the top of the eave. This will ensure that the maximum amount of heat from the summer sun is blocked by the eaves, while still allowing the warmth from winter sun to penetrate the window.

What is the purpose of an eave on a roof?

Eaves are the edges of a roof that juts over the sides of a structure. Inside a typical home, usually in the attic, the eave is the angle where the outside wall connects to the roof, making it an excellent place to install insulation.

What are the different types of eaves in a house?

Types of Eaves. 1 Closed eave: An overhang with a soffit that closes and finishes the underside of the eaves. 2 Open eave: An overhang with an exposed underside and visible rafters. 3 Box eave: An overhang enclosed with a soffit and a build-up of ornamental molding so the rafters are no longer visible.