Contents
Can you adjust a flush valve?
Turn the Adjustment Screw Clockwise or Counterclockwise Turn an adjustment screw located on the top of the valve. To raise the water level, turn the adjustment screw clockwise; to lower the water level, turn the screw counterclockwise.
Why does my toilet handle not flush?
Check the flush handle and adjust as needed if it’s too loose or too tight. Check the lift chain and make sure it’s properly attached to the lift arm and the flapper at the base of the flush valve. Untangle or adjust as needed. Make sure the flapper seals the flush valve opening.
How can I adjust the water level in my Kohler toilet?
It is important for the tank to have the proper amount of water to ensure the toilet flushes properly. KOHLER toilets have a water level indicator located on the flush valve or on the tank wall. The water level is raised or lowered by adjusting the float on the fill valve. First, identify the type of fill valve in your toilet.
How to adjust the water level on a dual flush toilet?
This video shows you how to adjust the flush water level on a dual modern flush toilet. This is for toilets without the traditional ball and valve system which are on the older models. The water level on these modem toilets are general set quite low and in turn don’t give a particularly good flushing action which in turn could cause blockages.
How does the float work on a Kohler toilet?
The intake opens and closes using a lever with the float attached to it. As water rises in the tank, the float rises with it. Once it hits a set level, the water supply shuts off. Newer tank floats move up and down along a vertical pipe, and this system is known as a Fluidmaster.
What should I do if my Kohler toilet is not running?
There’s an adjustment rod on the side, and sometimes, it needs to be adjusted to regulate the amount of water in the tank. Remove the lid on your tank. Then check to see if the float is actually floating. If it is and the toilet won’t stop running, you can adjust the ball float.