Contents
Are thermostats easy to install?
To install a programmable thermostat, you don’t need to be an expert handyman. Even a novice can easily complete the project using the instructions below.
Do you need a professional to install a thermostat?
And you would be right—in most cases. However, if you are planning to install a new “smart” thermostat requiring a continuous power supply, and you do not already have a C-wire, you could very well need professional help to install your new device correctly.
How difficult is it to change a thermostat?
Upgrading to a thermostat that automatically changes the indoor temperature setting is fairly easy, and it can trim about $180 off your annual heating and cooling costs, according to the EPA. Simple models that only control heat are sold at home centers for around $25.
Who can install new thermostat?
A HVAC repair technician who thinks that your issues with adequate heating and cooling originate from a poorly located thermostat will advise you to install a new one. We offer new technology like wireless thermostats as well so you can get the most from your home’s heating and cooling.
What’s the best way to install a new thermostat?
Spread the furnace control wires apart to keep them from falling behind the wall. Remove the base from the new thermostat and position it on the wall where the previous thermostat was located. Use a level to make sure it is straight so the internal sensor will be accurate. Mark the wall through the mounting holes on the base.
How to install a programmable thermostat at Lowes?
1 Turn Off the Unit and the Power. Turn off the old unit. 2 Remove the Thermostat 3 Label the Wires 4 Take a Picture 5 Disconnect the Wires 6 Remove the Old Wall Anchors 7 Install the New Wall Plate 8 Connect the Wires 9 Install the Batteries 10 Mount the Thermostat 11 Restore the Power
How do you connect a smart thermostat to the backplate?
Once the backplate is securely attached, connect the thermostat wires to their corresponding terminals. If you labeled your wires with stickers, this step should be very straightforward. If not, consult the photo of the wiring on your old backplate to match the wires to their terminals. 7. Install the New Faceplate
How to find the best smart thermostat for your home?
Take a photo of the wiring with your smartphone so you have a record of which lines connect to which terminals. Some thermostats also include stickers to label the wires with the codes on the terminals. Place them before you disconnect the wires. Check our comprehensive smart thermostat ratings to find the right smart thermostat for your home.