Can all ceiling fans be controlled by remote?

Can all ceiling fans be controlled by remote?

While most ceiling fans are remote control adaptable, meaning a remote can be added if desired, there are some of fans that come with a remote and cannot have a switch installed (i.e. remote only). Majority of fans include a wall switch (3 speed dial) that can be fitted into any standard switch plate.

Do smart switches work with ceiling fans?

Enbrighten Z-Wave Plus smart fan speed control Easily replace any standard in-wall switch to remotely turn on or off and adjust speed levels – high, medium and low settings – of a ceiling fan.

Can Logitech Harmony control RF devices?

Harmony remotes cannot control RF devices. The Harmony 900, 890, 1000 and 1100 use RF technology, but none of them use RF to directly control the device.

Are ceiling fan remotes IR or RF?

Ceiling fan remote controls come in both IR or RF varieties, but most are RF. If you do have an IR remote control, you’ll need to be sure the Bond is placed so it has a clear line of sight to the fan.

How can I control my ceiling fan without a remote?

To control a remote-controlled ceiling fan without using the remote, add a pull cord to the pull switch on the motor module. The pull cord can be purchased from a hardware store or garden and patio shop, while the tools needed are already in most households.

What do I do with the red wire when installing a ceiling fan with remote?

A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.

Can you connect a ceiling fan to Alexa?

ALEXA AND GOOGLE-CERTIFIED – This device is certified by Amazon and Google to work with Alexa and the Google Home Assistant. Control your ceiling fan with voice commands. Simply plug in the BOND device, download the app to your phone, point your fan remote at the BOND, and you’re done!

How do ceiling fan speed controls work?

Fan speed is reduced by placing a capacitor in series with the switched live feed to the fan reduce power. The capacitor acts as a dropper. Speed depends on the value of the capacitor in circuit. The speed control switch selects a different capacitor to give different speeds.

Can harmony elite control RF devices?

They are, however, compatible with Wi-Fi and Bluetooth, which the Harmony Elite supports through its bundled Harmony Hub. The remote communicates with the Hub via RF signals, and the Hub can then communicate with all your devices over infrared, Wi-Fi, or Bluetooth—whatever they support.

Is Harmony One IR or RF?

The Harmony One is a solid remote and pretty much everyone digs it. The design is solid, the setup easy enough, and the price about right. However, the remote is missing one key feature in a higher-end remote: RF capabilities.

Can a Harmony remote control a ceiling fan?

We get lots of emails from customers asking this question. Customers want to know if Harmony can control devices like their RF ceiling fan or RF fireplace. Well, the answer is no. All Harmony models, including the new Harmony 300, can only control IR (infrared) devices. Harmony remotes cannot control RF devices.

Can a Logitech Harmony fan work with an IR device?

If you already own a Logitech Harmony, you can program it to work with most IR devices. You could try typing your fan and model number into the Logitech Harmony compatibility site to see if it’s supported natively (five of the fans we tried weren’t).

How does Logitech Harmony work with the remote?

ASSIGN YOUR DEVICE TO THE REMOTE OR A SPECIFIC IR PORT ON THE HUB By default, Harmony hub-based products send IR commands to your devices from the hub, and from both IR mini blasters (if connected) at the same time. IR commands are not sent from the remote, however you may change this

Can a Harmony remote be used to control RF devices?

If the device responds even when your hand is covering the front of the remote, the remote is RF and the device cannot be controlled by the Harmony Remote. Although most RF devices cannot be controlled by the Harmony Remote, there are some exceptions.