Contents
Can I use body filler over primer?
Can you apply body filler or bondo over primer filler? Yes. You CAN apply over sanded 2k primer, or bare metal. Be sure to have the area sanded with at least a 150 so the filler has some TOOTH to grab to.
What do you put over epoxy primer?
The tech sheets for most Epoxy Primers recommend sanding and recoating with more Epoxy Primer after 7 days. Quote: The tech sheets for most Epoxy Primers recommend sanding and recoating with more Epoxy Primer after 7 days. Scuff it and shoot some 2K over it.
Can you put polyester filler over epoxy?
That said, I always found that method odd because in fiberglass boat repair, the cardinal rule is epoxy over epoxy or polyester (auto filler is polyester resin) but NEVER polyester over epoxy because of adhesion problems.
Should you primer before body filler?
Before adding any filler, you should get the metal fairly close. For small repairs, you can bog directly over the bare metal. If the repair is larger, or you’re looking for a longer-lasting job, apply a base coat of epoxy primer before laying on the filler.
What primer goes over body filler?
Urethane primer (2K) Urethane primer is the most common primer used in auto body and restoration by far. It has good solids and fills well. It is easy to sand and can provide you with a perfect body when blocked properly. Care should be taken when applying it as to not use too much.
Can you spray clear coat over epoxy primer?
Just spray on your epoxy, then a coat of single stage in whatever gloss you want. So easy a caveman can do it!!
Can you use polyester primer over epoxy?
All bare metal areas are covered with epoxy primer. VP2100 Polyester Primer should not be applied over bare metal, only over epoxy primer, fiberglass, or body fillers. Epoxy primer has dried overnight. 1 Clean the area thoroughly with the appropriate PPG cleaner, using clean towels.
Can a body filler be applied over primer?
Click to see full answer. In respect to this, can body filler be applied over epoxy primer? Applying body filler over epoxy primer provides maximum corrosion protection for the metal. Apply filler within seven days of applying epoxy primer to maximize adhesion.
How to apply body filler over epoxy?
OPTIONAL: Scuff Epoxy with P120-P180 grit sand paper or red scuff pad. 2 Mix and apply body filler over epoxy. Beside above, can you put body filler on Baremetal?
Can you use epoxy primer on bare metal?
Epoxy Primers have excellent adhesion properties and will stick to bare metal, paints, primers, and fillers. This means you can hit an area with epoxy primer that’s been sanded down to bare metal, repaired with body filler, and then feathered into the original paint.
What kind of resin is used in autobody filler?
Autobody filler is (basically) made of a vinylester or a polyester type resin. Epoxy primer is (basically) made of an epoxy type resin. vinylester or polyester is never used, epoxy is. it’s going to be a physical bond.