Contents
Can you adjust blower speed on furnace?
Once you cut the power, you can remove the cover of your furnace to get access to the control board. Adjusting the pulley on the blower driver motor lets you increase or decrease the blower speed. Turn the pulley one rotation clockwise on the shaft. If you want even more speed, do two rotations.
How do I adjust the blower motor speed?
You can increase or decrease the blower speed by slightly adjusting the pulley on the blower drive motor. To increase blower speed, slightly loosen the setscrew that holds the pulley to the driveshaft. Move or turn the pulley clockwise on the shaft one turn, then tighten setscrew.
Should I set my furnace fan to auto or circulate?
Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.
What fan speed should I use for heating?
For your furnace and AC to work properly, and keep humidity in check, your system first needs to be sized correctly. Second, it needs to be installed correctly, and fan speeds need to be set to deliver CFMs between 350 and 400 CFM/ton of cooling.
How do I increase the airflow in my furnace?
3 Simple Ways to Improve Your Furnace’s Airflow for More Comfort
- Unblock and clean your vents. Here’s a super easy way to increase air flow.
- Change your filters and clean your return grill. A dirty air filter impedes air movement and makes it hard for your furnace to work efficiently.
- Seal leaky ductwork.
How do I increase fan speed?
Use the arrow keys on your keyboard to scroll through the BIOS menu to the “Monitor,” “Status” or other similarly named submenu (this will also vary slightly by manufacturer). Select the “Fan Speed Control” option from the submenu to open the fan controls.
Should thermostat be on auto or fan?
If you want to keep the energy bills low, you should set the thermostat to ‘Auto’. However, if you prefer more even distribution of heat inside the house, it’s better that you set the thermostat setting to ‘On’.
What is difference between fan on and circulate?
When the heat is on, the fan will only turn on as your home heats up. When cooling, the fan will only run while your air conditioner is running. Most new thermostats have a “circulate” option that allows you to set the fan to run a certain amount of time per hour.
How do you change the setting of a Furnace Fan?
To switch the jumper, you will need to hold onto it gently as you pull it out of its current setting. Then, carefully switch it to the setting of your choice and push it back into the control board. Furnace Fan: Which thermostat wires control the furnace fan? Furnace Fan: Should a Furnace Fan Run Continuously?
Is there a fan limit switch on a furnace?
In many models it also has a built-in safety control for the burner to shut off at higher temperatures if the burner’s inner control malfunctions. The switch is one of the easier devices and attachments on a furnace. The average consumer can both locate and set the fan limit control switch with ease.
Where is the fan control board on a furnace?
You need to run a new thermostat wire from your thermostat to the furnace. 18/5 would be preferred. Now your thermostat will control the fan when you switch “FAN” to ON. In AUTO, it will be controlled by the fan control baord in the furnace. The fan control board is located inside the blower cabinet.
What should I do if my Furnace Fan is not working?
This will help prevent injury and damage to the furnace fan. You will need to find the main cover panel on your fan. If you are having problems, find your fan’s user’s manual and use it as a guide. Once you have located the panel, remove it. This will allow you to access the control board.