Contents
Can you sand Quikrete Vinyl Concrete Patcher?
Sand the Quikrete Vinyl Concrete Patcher and the area surrounding the compound with a 200-grit or higher piece of sandpaper to smooth out the surface. Change sandpaper frequently, and then wipe the surface with a soft rag or towel to remove any loose sanding dust and dirt.
What is the best product to resurface concrete?
QUIKRETE® Concrete Resurfacer provides a beautiful, durable, wear resistant surface designed to withstand heavy foot and vehicle traffic. QUIKRETE® Concrete Resurfacer provides an economical alternative to removing and replacing existing old, spalled concrete.
How long does it take vinyl concrete patch to dry?
Mix only that amount of Vinyl Concrete Patcher that can be applied in 30 minutes. CURING Under hot, dry or windy conditions, keep the patch moist for 24 hours by covering with polyethylene film. Product will support foot traffic in 1 day. Allow 3 days for wheeled traffic.
How long does a vinyl patch take to dry?
How long does it take for vinyl cement to dry?
Similarly, how long does vinyl cement take to dry? Complete curing time takes approximately 24 hours. 8. Be careful when rolling up a repaired boat for storage.
How soon can you paint quikrete?
I want to paint a project built or repaired with QUIKRETE® products. In general we recommend that you wait about 7 days for latex paints and 28 days for oil based paints.
Which is better quikrete or sakrete?
In general, Sakrete is more suitable for flat surfaces and fence posts, while Quikrete is better for curbs, stairs, sidewalks, and other footings. Neither product is better than the other; however, one may be better for a particular job.
What kind of concrete is Quikrete vinyl patcher?
QUIKRETE® Vinyl Concrete Patcher (No. 1133) is a multi-purpose concrete repair material with strong adhesive properties. Trowels to a feather edge of 1/16″ (1.6 mm). Made of a special blend of exterior grade vinyl resin, fine sand, and portland cement.
How much water to add to vinyl concrete patcher?
Mix Vinyl Concrete Patcher by adding about 10 ounces of water per 5 pounds of Vinyl Concrete Patcher (the Vinyl Concrete Patcher should be poured into the mixing water). NOTE: the more water that is added during the mixing process, the weaker the bond strength and compressive strength will be.
What kind of cement do you use to patch a feather in concrete?
QUIKRETE® Vinyl Concrete Patcher (No. 1133) is a multi-purpose concrete repair material with strong adhesive properties. Trowels to a feather edge of 1/16″ (1.6 mm). Made of a special blend of exterior grade vinyl resin, fine sand, and portland cement. Just add water.
How long to mix vinyl concrete for putty?
Mix the Vinyl Concrete Patcher for 3 to 5 minutes using a margin trowel. After a lump-free consistency is achieved, allow the mix to sit undisturbed for about 5 minutes. Remix the Vinyl Concrete Patcher; additional water may be added in small amounts to achieve a putty consistency.