Contents
Can you screw through floor leveler?
If you are putting backerboard over the leveler then that is an easy answer: all the screws will just bust the leveler and will not work! I would simply put down the backerboard with thinset under the backer board then screw, NOT nail it down.
Can you nail into self leveler?
Some self-levellers can be nailed through, others you can’t. So if you’re installing hardwood flooring over top, you will need a self-levelling cement that you can nail through. Also, some products can have tiles installed on top, others require a decoupling membrane on the substrate before the cement can be poured.
Can you nail hardwood through self-leveling compound?
But to answer your question. No, you should not use any “leveling/patching” compound over a wood subfloor where you plan on driving nails into it. You could use it, assuming you used the right one, for a floating floor or a glued down floor.
How thick can you spread floor leveler?
How thick you can pour self-leveling concrete depends on the specific product used. But standard thicknesses are between ⅛ inch and 1 inch. However, it is possible to get options that pour as thin as 1/25 inch and as thick as 5 inches.
Can I put plywood over floor leveler?
If you’ve got a plywood subfloor, like many buildings do, you can leave it in place and apply self-leveling concrete directly on top of it. Once the plywood subfloor is covered, just apply the finish you want to achieve the desired look.
Can I use floor leveler under hardwood?
If you are nailing the hardwood floor in place, choose cementitious leveling compound that you can nail through. Use builder’s felt or shingles stapled to the floor to fill small low spots if you don’t want to wait for leveling compound to dry.
How thick can you pour self leveling epoxy?
Self leveling concrete is mixed very fine into a flowable mixture that is applied at ¼ – ½ inch thick.
Can You nail through self leveling cement flooring?
Can I nail through floor leveling compound? Some self-levellers can be nailed through, others you can’t. So if you’re installing hardwood flooring over top, you will need a self-levelling cement that you can nail through.
What can a self leveling compound be used for?
A self-leveling compound is ideal in smoothing out uneven wood floors and concrete floors. Concrete floors may have bumps, especially if poured incorrectly; wood floors often have problems with dips and bumps.
Do you need to put floor leveler on top of flooring?
So if you’re installing hardwood flooring over top, you will need a self-levelling cement that you can nail through. Also, some products can have tiles installed on top, others require a decoupling membrane on the substrate before the cement can be poured. In respect to this, how thick can you put floor leveler?
How big of a leveling compound do I need for plywood?
The minimum thickness advised for many levelling compounds is only 2 or 3 millimetres (some require a minimum of 5mm). Subsequently, one may also ask, can you use floor leveler on plywood? Things You’ll Need These compounds are used to level out low areas in plywood substrates in preparation for laminate, wood or tile flooring installation.