Menu Close

Can you use 3/8 drywall ceiling?

Jim Brown

Can you use 3/8 drywall ceiling?

Joe, yes you can use 3/8-inch drywall on ceilings like this. It’s the BIBLE of everything drywall and plaster. In this great book you’ll find the minimum recommendations for installing 3/8-inch drywall, including fasteners, spacing, etc.

Should drywall touch the ceiling?

Note that drywall on the wall should support the ceiling drywall, meaning you install the ceiling first, and the wall is installed tight against the ceiling. For the bottom piece, you use a roll lifter under the drywall to lift it up and give you a tight fit to the board above it.

Should I sheetrock walls or ceiling first?

Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level. Irregularities less than 1/8 in.

Should I drywall walls or ceiling first?

Should I sheetrock the ceiling or walls first?

How many screws do you put in sheetrock on the ceiling?

In standard home construction, about 28 screws are needed to properly attach a 4-by-8-foot piece of drywall. That’s if the panel is going on a wall. If it’s going on a ceiling, it’ll take about 36 screws.

How many screws go into a 4×8 sheet of drywall?

How Many Screws Per Sheet of Drywall. Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.

https://www.youtube.com/watch?v=DRfywOUQF0E

What’s the standard thickness of drywall for a ceiling?

One-half inch panels are standard on the ceiling. Unless local building codes specify a thickness for ceiling drywall, using panels that are one-half inch thick on ceilings with 16-inch joist spacing is standard.

When do you need thicker drywall in your home?

Thicker drywall may be required by code for any wall or ceiling covered with a texture or skim coat where studs or joists are spaced 24 inches on-center rather than 16 inches. This thicker drywall is often called fire-resistant drywall.

How big should drywall be over plaster ceiling?

Install 1/2-inch drywall over the plaster and the thinner patch. This material works better than 3/8-inch drywall over old ceilings, which are often not quite level. Attach drywall installed over plaster ceilings to the joists under the plaster at intervals of 8 to 12 inches using 2-inch drywall screws.

How big of a sheetrock panel do I need for my Ceiling?

If the ceiling joists are spaced 24 inches apart, some builders upgrade from one-half inch panels to five-eights inch panels and building codes may require it. These thicker drywall panels span the wider joist distance without increased risk of warping.

Can you use 3/8 drywall ceiling?

Jim Brown

Can you use 3/8 drywall ceiling?

Joe, yes you can use 3/8-inch drywall on ceilings like this. It’s the BIBLE of everything drywall and plaster. In this great book you’ll find the minimum recommendations for installing 3/8-inch drywall, including fasteners, spacing, etc.

Do you need special drywall for ceiling?

Standard: Standard drywall doesn’t have any special features added to the design. It is popular inside residential construction. Suitable for walls and ceilings.

How do you know what size drywall to use?

The most common thicknesses for general application are 3/8 inch and 1/2 inch. However, several decades ago, 1/2 inch became the industry standard. Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall.

Is lightweight drywall good for ceilings?

There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.

Can you use 1/2 inch drywall ceiling?

1/2-inch: Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. When installed on ceilings, 5/8-inch-thick panels are more resistant to sagging than 1/2-inch panels.

Can you put drywall over existing ceiling?

Things You’ll Need For a ceiling that is cracked and possibly stained, a good method is to re-cover the entire ceiling with a new layer of drywall. By re-covering the entire surface of the ceiling it allows you to basically start over to achieve that nice smooth and even surface you want.

Is there a difference between ceiling drywall and regular drywall?

Drywall and sheetrock are really the same thing. Drywall is a panel made of gypsum plaster pressed between two thick sheets of paper. Sheetrock is a brand of drywall patented by the US Gypsum Company. Both are used to make walls and ceilings.

Is it better to hang drywall vertical or horizontal?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.

Should I sheetrock the ceiling or walls first?

Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level. Irregularities less than 1/8 in.

https://www.youtube.com/watch?v=DRfywOUQF0E

Can you use 5 / 8 inch drywall on a ceiling?

Though the 5/8 inch dry walls used for ceilings are heavy, they rarely sag and can also be adopted for the walls. However, not everyone uses the thickest drywalls on the interior of their house as some people prefer to use the ½ inch drywall. This type comes recommended for walls that have studs placed up to 16 inches in the center.

What’s the average thickness of a ceiling panel?

Ceiling Drywall Thickness and Width The panels of drywall usually come in 4-foot-wide sections, which can be cut to suit the dimensions of the space you’re finishing. For residential spaces, drywall panels can be 3/8 inch thick, a quarter-inch thick, or half an inch thick. Some types of drywall can be as thick as 5/8 inch.

How big of a wall do you need to hang drywall?

When hanging drywall on walls that intersect 8-ft. (or lower) ceilings, two 4-ft.-wide panels of drywall hung horizontally results in just one seam running the length of the wall. But more and more homes are being constructed with 9-ft. ceiling heights, which means that 4-ft.-wide drywall creates two horizontal seams on each wall.

What should the thickness of a drywall panel be?

The panels of drywall usually come in 4-foot-wide sections, which can be cut to suit the dimensions of the space you’re finishing. For residential spaces, drywall panels can be 3/8 inch thick, a quarter-inch thick, or half an inch thick. Some types of drywall can be as thick as 5/8 inch. So how thick should the ceiling drywall be?