Contents
Do you use ridge vent on metal roof?
Ridge vents are the most popular option for metal roofs and are an effective way to achieve proper attic ventilation. Ridge vents are installed at the ridgeline of the roof and run continuously along the entire span of the roof.
How do you install a vented ridge cap?
Instructions
- Remove the Shingle Caps. Start by removing the nails holding the ridge cap shingles in place.
- Cut the Ventilation Opening. The next step is to cut the wood decking back along the ridge.
- Install New Field Shingles.
- Install the Ridge Vent (Shingle-Over Style)
- Install the Ridge Vent (Aluminum Ridge Style)
How do you vent a metal roof over shingles?
To vent the roof, holes are cut in the old roof above the soffit, which pulls air through the soffit vents underneath. Cool outside air then travels under the shingles to the vented ridge, pulling out moisture and heat.
How to install a ridge vent for metal roofing?
Each screw should be positioned 1/2 inch above the edge of the ridge cap and should be driven until the neoprene gasket on the screw begins to spread out from beneath the metal washer. Add a second section of ridge cap to the end of the first piece, overlapping the first by six inches.
How big is the gap in a metal ridge roof?
The metal ridge vent (as one stands inside the building looking up to the vent) shows a 3-4″ gap for ventilation. There is no mesh to prevent any debris or bugs, etc.. from entering through the vent. The roofer told me to simply stuff foam in the vent to prevent anything from entering.
Where to place ridge cap on metal roof?
Position a section of metal ridge cap over the peak of the metal roof, with the end of the ridge cap flush with one end of the roof peak. You can mark a pencil line on the ridges of the installed metal roofing panels, using the edge of the ridge cap as a guide.
What kind of vents do I need on my metal roof?
Metal Roof Ridge Vent – One of the most important components of a residential roof is the ventilation system. The Good and Proper ventilation is the key to lowering home energy costs, preventing attic mold. Traditional roofers use passive ridge vents which are ineffective.