Contents
How deep of a dent can you Bondo?
There is no minimum thickness for Bondo, but there is absolutely a maximum. You do not want to apply body filler to anything that is thicker than about a 1/4”. That does not mean it can’t be done, but the repair will not last as long. Eventually the filler will shrink and possibly crack or even fall off.
Can I fix a dent with Bondo?
Little dents on your car can end up costing big bucks to repair, but with Bondo® Brand Products by 3M™, you can repair small dents yourself and save you hundreds of dollars, even if you have a body shop do the painting.
How do you fill dents in a car?
How to Fill Small Dents and Holes in a Vehicle’s Body
- Clean the body area thoroughly.
- Sand the area.
- Mix only as much hardener-filler as you’re going to use right away.
- If you’re patching a hole, place something beneath the hole to keep the filler in place.
- Apply the filler.
How bad of a dent can be repaired?
Most minor dents can be repaired by the dent repair experts at Dented so long as the paint is still intact, and the dent isn’t too complex in nature. Since paintless dent repair can remove 80-90% of dents, it is the best way to get a dent out of your car.
What happens if you don’t use enough hardener in bondo?
without it the bondo will never get hard. put a lil glob of bondo on a board and run a line of hardener over the top from end to end. mix it up and apply, it should give you about five minutes working time before it starts to harden. once it starts tacking up, stop trying to apply it or you’ll just mess it up.
How to fill in a dent with Bondo?
3) Stage 3 is about filling in that dent with bondo body filler and sanding it down using anything from 180-400 grit sandpaper. 4) Step 4 is all about the painting process.
How does a 3m Bondo Dent puller work?
3M’s line of Bondo dent pullers use suction to remove a dent in your vehicle’s body. Using suction eliminates the need to drill holes in the body, or deform it with body hammers. The amount of suction applied to the vehicle body depends on the cleanliness of the vehicle body and the amount of contact between…
What can I do about a dent in my car?
Some day you are going to wind up with a dent in your car. A good body shop can repair most dents using bondo. 3M makes a wide range of body repair and abrasives products. They have designed a general 4-step process for repairing car dents and other body damage using bondo.
How big of a dent can you repair with body filler?
Body filler doesn’t stick well to paint, so you’ll need to sand the damaged area down to the bare metal in order for the Bondo to work. For this job, you can use a heavier sandpaper, like a 150-grit. Regardless of how large the actual damage is, you must remove at least 3 inches beyond the dent.