Menu Close

How do I change the code on a Honeywell door lock?

Jim Brown

How do I change the code on a Honeywell door lock?

How to change the master code of a Honeywell Alarm system

  1. Press 8 (the CODE key).
  2. Press 02.
  3. Enter a new four-digit master code.
  4. Re-enter the new code. The keypad will beep once to let you know that the code has been changed.

How do I reset my Honeywell safe?

How to Reset a Honeywell Electronic Safe

  1. Enter your current passcode on the keypad.
  2. Rotate the handle clockwise and pull the safe door open.
  3. Press the red memory button, located near the bottom hinge on the inside of the door.
  4. Enter your new passcode on the keypad.
  5. Test out your new passcode before closing the safe.

Is there a way to reset the Honeywell installer code?

If you own a Honeywell Lyric Controller there is no way to reset the Installer Code without already knowing the current Installer Code. If you don’t know the current Installer Code your only option is to get the code from the last dealer. Unfortunately if they won’t release this code to you the panel can NOT be monitored by any other dealer.

How do you change the passcode on a Honeywell door?

Position the door so you can view the keypad, but do not close the door all the way. Enter your desired passcode. The code must be no less than three numbers and no more than eight. Press the letter “B” on the keypad once you enter the passcode. Close the door.

How to install a Honeywell store front door?

DRILL AND CHISEL DOOR a. Drill 2-1/8” (54mm) hole through door face as marked for lock set (Figure 3a). b. Drill 1” (25mm) hole in center of door edge for Latch (Figure 3b). c. Insert Latch in hole keeping it parallel to face of door. Mark outline and remove Latch (Figure 3c). d.

What is the installer code for Honeywell Safewatch pro?

If you have an ADT SafeWatch Pro which is a rebranded Honeywell Vista control the default Installer Code is 6321. If you own a Honeywell Lyric Controller there is no way to reset the Installer Code without already knowing the current Installer Code.