Contents
- 1 How do I clear the code on my Intex E90 hot tub?
- 2 What is E90 error code?
- 3 How do you clear a hot tub error code?
- 4 What does error code E94 mean on Intex hot tub?
- 5 What to do if you get an E90 on your Intex hot tub?
- 6 What does error code E96 mean on Intex hot tub?
- 7 What are the error codes on the Intex purespa?
How do I clear the code on my Intex E90 hot tub?
If the E90 code appears after running for a while: If there is debris inside, turn the control unit off, unscrew the spa inlet/outlet grid with a Phillip screwdriver. Clean and replace it back. Make sure the spa water is clean and sanitized.
What is E90 error code?
As for the E90 fault. It indicates no water flow. They shut down for two reasons. Without flow the heater could over heat and cause a fire.
How do I reset my Intex hot tub?
How do I reset my Intex spa?
- Locate the spa’s high-limit reset. This is a red button found on many spa packs.
- Press the high-limit reset button.
- Turn on your spa and observe its operation.
- Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.
How do you clear a hot tub error code?
Solution A: Increase the hot tub water level Switch off the power and remove the filters. After 20 minutes, switch the power back on and run the spa/jets without the filters to see if it clears the flow issue. If the flow clears, switch off the power again, replace the filter and then switch on the power.
What does error code E94 mean on Intex hot tub?
water temperature is too low
If alarm code E94 is displayed on the control panel, it means the water temperature is too low. If alarm code E94 appears, unplug and plug back in the GFCI/RCD and test the GFCI/RCD to restart the system when the spa water temperature is higher than 39ºF (4ºC).
What does E90 mean on a washing machine?
The error code E90 is just a group error code. It is indicating a communication error between the two boards in your machine. It does not indicate where the problem, may be a power glitch may have caused the E90 error code or a loose connection. One of the control boards could have failed.
What to do if you get an E90 on your Intex hot tub?
Make sure the spa water is clean and sanitized. If you don’t want to see again E90 Error code on your Intex Pure Spa Hot tub make sure these 2 things: Water is filled to the recommended level. The filter cartridge is clean and properly installed. Turn off or unplug the control unit.
What does error code E96 mean on Intex hot tub?
If you are facing an error code of E96 on your Intex Inflatable hot tub and want to troubleshoot it then you are at the right place. The error code E96 which displays on your Intex hot Tub Control Panel that means your Spa is facing a system error.
How do I Reset my Intex hot tub control panel?
Spa E90 Troubleshooting. Also, how do you reset an Intex hot tub? If this happens, first press the “RESET” button on the side of the spa control unit using a small and thin object till the E98 alarm stop, then unplug and plug back in the RCD to restart the system. Thereof, how do I reset my hot tub control panel?
What are the error codes on the Intex purespa?
There are several error codes you might see on your Intex PureSpa inflatable hot tub like e90, e94, e96, e95, e98, e99. If you are facing any of these error codes, don’t worry our full error code troubleshooting guide will help you to solve all these error codes.