Contents
How do I fix my SRS light on my Mitsubishi?
Put the key into the ignition and turn the switch to the “on” position. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
What is SRS in a Mitsubishi?
SRS stands for Supplemental Restraint System which is the proper name for the Airbag System in your vehicle. When the SRS light is illuminated on the dash, this means that the Airbag Control Unit sees an issue in the system and has disabled the system.
How do you fix the SRS light?
How to Reset an Airbag Light
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
What causes an SRS light to come on?
Your SRS light might go on after an accident if the airbags did not deploy. When a collision occurs, the system was likely triggered through the crash sensors. However, if something malfunctioned, causing your airbags to fail, a fault will be sent to the computer.
Is there a recall on Mitsubishi?
Recall no. Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2014-2019 Outlander and 2018-2019 Outlander PHEV vehicles. The second-row center seat belt buckle may interfere with the right-side seat belt buckle when the seat backs are folded down.
Can the SRS light be reset?
How do you reset the SRS light? It should be noted that turning off the airbag warning light will not fix any problems. Only reset the light after the necessary repairs have been completed. A professional can turn off the light (and clear the corresponding trouble codes) with an OEM-level scan tool.
Why does the Mitsubishi SRS warning light stay on?
Mitsubishi airbag warning light stays on to notify the driver that the airbags may not deploy if you get in an accident. Airbag or SRS light stays on when the Supplement Restraint System (SRS) detects a malfunction. If the airbags don’t deploy during an accident, you or your passengers may suffer serious injuries.
What does the SRS light mean on a Mercedes Benz?
What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.
Is there a way to reset the SRS light?
You can’t rest the airbag SRS light with a simple OBD II scanner which gives you the check engine light codes. You will need a more advanced scan tool to reset the airbag light. For around $110-150, which is how much a diagnosis costs anyway, you can get your airbag reset tool.
When does the SRS airbag warning light come on?
Low voltage – SRS airbag light can be triggered when you jump-start a dead car battery. Previous accident – Even a small accident may be recorded in the SRS module triggering the airbag light to come on.