Contents
How do I make my Leviton switch discoverable?
How do I make my Leviton switch discoverable?
- For outlets or plug-in modules, press the button once.
- For in-wall switches and dimmers, press up on the switch once.
- For Z-Wave Plus in-wall models: Hold the top of the dimmer for seven (7) seconds. Release the dimmer when the LED blinks amber. Press up on the switch.
Why is my Leviton not working?
Make sure you have the latest version of the My Leviton App. To ensure that you are running the latest version of the app, check for a My Leviton app update on the Apple App store or Google Play store. If available, try using a different mobile phone or tablet running the My Leviton app.
How do I get Leviton back online?
Simply press and hold the up paddle/button for 3 to 5 seconds and then release. This reboots the device and runs a diagnostic mode. Watch the LED at the bottom and take note of the color pattern that flashes after you release the button. After a minute, check your app to see if the device has come back online.
How do you program a Leviton light switch?
To program your device: a) Perform a System Reset by gently lifting the VPT24 door from the bottom of the push pad until an audible click is heard. The door will stay open while you are programming the device: b) Press and hold followed by (Override) until stops flashing and flashes (approximately 10 seconds).
How do I update my Leviton firmware?
The firmware update process can be ran through a couple of different ways through the Leviton Decora Smart app. The first option is to simply tap on the settings icon in the top left hand corner of the app after opening it, and then by selecting “Update Firmware”.
How do I reset my Smart switch?
To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults. For the HS300/KP303, the control button works as both the power and reset button.