Contents
How do I pick a disc detainer lock?
The Disc Detainer Pick: Insert the pick into the padlock and apply some clockwise turning tension on the handles of the disc detainer pick. Push the picking section of the detainer pick into the padlock attempting to feel each of the discs within the lock. Turn each one clockwise until they cannot turn any further.
Are disc detainer locks hard to pick?
Disc tumblers tend to be more difficult to pick than competitively priced pin tumbler locks, and are often sold as “high security” locks for that reason. Picking the lock is not impossible but typically requires dedicated, professionally made tools. They may also require more time to pick.
How does disk detainer lock work?
Disc-detainer keys have angled bitting cuts that rotate discs. When rotated properly, a sidebar will fall into a gate on the discs allowing the key to turn further and actuate the locking bolt to lock or unlock the lock. Disc-detainer keys have angled bitting cuts to properly rotate each disc.
Can a disc lock be picked?
Yes, even a disc lock can be picked. But it is not too easy for all to do so. Picking a disc lock requires special tools, experience, and above all, patience.
What is a disc detainer pick?
A Disc-detainer (or disc lock, disk lock) is a lock design that uses rotating discs as locking components. In most designs the discs interface with a sidebar when properly rotated to allow them to actuate the locking bolt. Disc-detainers are primarily associated with Abloy locks, ABUS and Kryptonite.
What is a lock detainer?
A detainer lock is a specialized lock only available from Chubb. Detainer locks do not have levers to operate the bolt, instead they use detainers, which are more resistant to picking. Detainer Locks are available master keyed and keyed alike.
What does a disc lock look like?
A disc lock is one kind of padlock shaped like a disk. It features a short U-shaped shackle to make It extremely difficult for intruders to cut it with bolt cutters. Usually, the lock comes with keys, so you don’t have to memorize a combination for your lock.
How does a disc detainer key work on a lock?
Disc detainer keys have angled bitting cuts that rotate discs. When rotated properly, a sidebar will fall into a gate on the discs allowing the key to turn further and actuate the locking bolt to lock or unlock the lock. Master keying is provided by wide or duplicate true gates on the discs themselves.
How does a disc tumbler lock work on a safe?
Disc tumbler locks are composed of slotted rotating detainer discs. A specially cut key rotates these discs like the tumblers of a safe to align the slots, allowing the sidebar to drop into the slots, thus opening the lock. Unlike a wafer tumbler lock or a pin tumbler lock, this mechanism does not use springs.
What are the features of a disc detainer?
The main anti-lockpicking feature of disc-detainers is the use of false gates (or notches), but more advanced designs include a disc locking system that prevents discs from being individually manipulated. Given the proper tools and skill, all disc-detainer locks are subject to one or more of the following:
How are discs used in a disc lock?
Please improve this article if you can. A Disc-detainer (or disc lock, disk lock) is a lock design that uses rotating discs as locking components. In most designs the discs interface with a sidebar when properly rotated to allow them to actuate the locking bolt.