Menu Close

How do I reset my Taylor Digital scale?

Jim Brown

How do I reset my Taylor Digital scale?

How do you reset your scale?

  1. Remove all batteries from the back of your scale.
  2. Leave the scale without its batteries for at least 10 minutes.
  3. Reinsert the batteries.
  4. Place your scale on a flat, even surface without carpet.
  5. Press the center of the scale with one foot to wake it up.

How do you calibrate a Taylor home scale?

Have questions?

  1. Remove the battery from the scale.
  2. Set the scale on the floor (no carpet) without the battery in place.
  3. Stand on the scale for 10 seconds (still without the battery).
  4. Carefully replace the battery without pressing any buttons or activating the scale.

How do you calibrate a digital scale?

Set the scale on a flat, level surface and turn it on. Wait a few moments for the scale to stabilize its readings. Locate the calibration switch (some scales require a sequence of numbers on the control panel) and activate the calibration mode. Place the quarter on the center of the scale and check the reading.

How do you adjust Taylor scale?

In general the procedure is to tap the power or set button until it brings up the height and then hit the arrow keys until you get to the correct height. Hit the power or set after each entry usually height, age, gender, athlete mode.

Why is my Taylor Food scale not working?

If you’ve had your scale for a while and it no longer is working, check that it is positioned on a stable, level surface. Using the scale on a location with an uneven floor surface can cause the scale to register an instability error on the display or provide an inaccurate weight.

What does Lo mean on a Taylor scale?

low-battery
Power Up. If you step on the scale and it doesn’t turn on, you may need to replace the batteries. Taylor digital bathroom scales have a low-battery indicator, so a “lo” or “bat” icon appears on the display when battery power is getting low.

How do you calibrate a Taylor bathroom scale?

How do you calibrate a Taylor bathroom scale? Set the scale on a hard surface, such as a wood floor. Place one foot on the scale, using just enough weight for the display to show dashes or zeroes. When the display turns on, remove your foot. Once the scale turns off, step back onto it with both feet to see accurate weight.

How to calibrate a Taylor digital food scale?

1 Switch It On. Start off by switching on your digital scale. 2 Refer to the Instruction Manual. Any digital scale will have a number of buttons, one of which is intended for calibrating it. 3 Press the Button. At this point press the calibration button. 4 Place the Calibration Weight.

How to calibrate your digital scale [ step by step guide ]?

How to Calibrate Your Digital Scale 1 Press ON/OFF to turn the scale on, and wait for the scale to stabilize, where it reads 0.0g. 2 Press and hold the MODE key, the middle button that says “M”, until the display reads “CAL”. 3 Take one more look at the platform to make sure it is totally bare. Press MODE again to confirm the zero point. More …

Can a Taylor digital scale be used on carpet?

Do not place your scale on a carpet; Taylor digital bathroom scales do not have “carpet feet,” so they cannot provide precise readings on carpeting. Your digital scale may show an error message or an inaccurate reading if the unit is overloaded.

How do I reset my Taylor Digital scale?

Jim Brown

How do I reset my Taylor Digital scale?

How to reset a Taylor scale is an easy task to do. One only needs press the power button and watch as the scale provide the information it has saved. Now, one has to press both the down and up button for roughly three seconds to clear the data for that user.

How do you adjust Taylor scale?

The procedure does vary according to the scale. In general the procedure is to tap the power or set button until it brings up the height and then hit the arrow keys until you get to the correct height. Hit the power or set after each entry usually height, age, gender, athlete mode.

Are Taylor lithium scales accurate?

The Taylor Talking Bathroom Scale is sturdy, reasonably priced, and reads the weight aloud. The MyWeigh XL-550 is reliable, accurate, and is designed to measure and hold up to 550 pounds.

Why is my Taylor scale inaccurate?

Your digital scale may show an error message or an inaccurate reading if the unit is overloaded. Each scale has a maximum weight capacity, so if the user weighs more than the maximum, the scale is unable to provide a weight. Immediately remove the weight or you may do permanent damage to the scale.

What does C mean on Taylor scale?

A “C” will appear during the first weighing, this is a self-calibrating feature on some scales. It means the scale is re-calibrating to zero. Please re-weigh for accurate reading. A “C” will appear during the first weighing, this is a self-calibrating feature on some scales.

How do I know if my Taylor scale is correct?

How do I know if my digital scale is accurate?

  1. Place one object on the scale. Note the weight. Take it off and let the scale even back out.
  2. If it matches, the scale is accurate. If it doesn’t, try it again and see if it is off by the same number. If it is, it might be that your scale is always off by that amount.

How do you calibrate a Taylor bathroom scale?

How do you calibrate a Taylor bathroom scale? Set the scale on a hard surface, such as a wood floor. Place one foot on the scale, using just enough weight for the display to show dashes or zeroes. When the display turns on, remove your foot. Once the scale turns off, step back onto it with both feet to see accurate weight.

Can you use a calibration weight on a digital scale?

Place a calibration weight, a U.S. coin, or household item on your scale. As long as you know the exact weight of the item, you can use it to calibrate the scale. Beside this, can you calibrate a digital scale?

What happens when the battery on a Taylor bathroom scale goes bad?

If you step on the scale and it doesn’t turn on, you may need to replace the batteries. Taylor digital bathroom scales have a low-battery indicator, so a “lo” or “bat” icon appears on the display when battery power is getting low. Display readings usually become dimmer as well.

How do you turn off a bathroom scale?

Place one foot on the scale, using just enough weight for the display to show dashes or zeroes. When the display turns on, remove your foot. Once the scale turns off, step back onto it with both feet to see accurate weight.

How do I reset my Taylor Digital Scale?

Jim Brown

How do I reset my Taylor Digital Scale?

How to reset a Taylor scale is an easy task to do. One only needs press the power button and watch as the scale provide the information it has saved. Now, one has to press both the down and up button for roughly three seconds to clear the data for that user.

How do I change the age on my Taylor Scale?

Change the age on the screen by pressing the up and down arrow buttons and save the setting by pressing the “Set” button.

How do you set up Taylor Smart Scale?

1. Turn on the Smart Scale by stepping on it with a bare foot until “0.0” displays. 2. Ensure your Bluetooth setting is “On” in your mobile device (Example: Settings > Bluetooth > On) By now you should have downloaded the SmarTrack™ App, registered and set-up your user profile.

How do you balance a Taylor scale?

How do you reset your scale?

  1. Remove all batteries from the back of your scale.
  2. Leave the scale without its batteries for at least 10 minutes.
  3. Reinsert the batteries.
  4. Place your scale on a flat, even surface without carpet.
  5. Press the center of the scale with one foot to wake it up.

Why does my weighing scale show different weights?

#1 Every time a digital scale is moved it needs to be calibrated. Initializing the scale resets the internal parts allowing the scale to find the correct “zero” weight and ensure accurate readings. If the scale is moved and you do NOT calibrate it, you are likely to see fluctuations in your weight.

What does Lo mean on a Taylor scale?

low-battery
Power Up. If you step on the scale and it doesn’t turn on, you may need to replace the batteries. Taylor digital bathroom scales have a low-battery indicator, so a “lo” or “bat” icon appears on the display when battery power is getting low.

How do you calibrate a Taylor bathroom scale?

How do you calibrate a Taylor bathroom scale? Set the scale on a hard surface, such as a wood floor. Place one foot on the scale, using just enough weight for the display to show dashes or zeroes. When the display turns on, remove your foot. Once the scale turns off, step back onto it with both feet to see accurate weight.

How do you change the setting on a Taylor digital scale?

To change this setting, change the switch on the underside of the scale to kilograms. Prep the scale for use. Taylor digital scales use a lithium battery. Remove the plastic strip from the battery area for the scale will work. Once removed, place the scale on a level surface and continue setup.

How do you change the age on the scale?

Turn on the scale by pressing the “Set” button. The display screen will show a height. Press the up and down arrow buttons to change the height reading so it matches your height and press the “Set” button to save the setting. Change the age on the screen by pressing the up and down arrow buttons and save the setting by pressing the “Set” button.

What kind of battery does a Taylor digital scale use?

Taylor digital scales use a lithium battery. Remove the plastic strip from the battery area for the scale will work. Once removed, place the scale on a level surface and continue setup. Initialize the scale. This step is required for the first use and after each battery replacement.