How do I reset my Weiser Smart lock?

How do I reset my Weiser Smart lock?

Weiser Lock reset:

1. Remove the battery cover using the Allen key.
2. Remove the battery pack.
3. Press and hold the program button while reinserting the battery pack.
4. Hold the program button for 30 seconds until the status LED flashes red.
5. Press the program button again.

How do I reprogram my Weiser code lock?

Note: Programming instructions can also be found on interior of lock.

1. a. Press the program button on the interior unit once.
2. b. Enter in 4 to 8 digit code onto the keypad.
3. c. Press the “LOCK” button to save code.
4. d.
5. a. Press the program button on the interior unit twice.
6. b.
7. c.
8. d.

How do I change the code on my Weiser Smart lock?

Keep door open. Press and HOLD the Program button until the keypad flashes green (about 5 seconds). 2. Enter new Mastercode.

Why is my Weiser lock not working?

Press and hold the program button while reinserting the battery pack. Hold the program button for 30 seconds until the status LED flashes red. Press the program button again. The lock has been reset when the LED flashes green.

How do you clear a Weiser lock code?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset.

How do I reset my Weiser SmartCode 10 code?

2 Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.

How do you remove a code from a Weiser Lock?

How do you take the code off a Weiser Lock?

1. Press the program button.
2. Press the lock button.
3. Enter user code to delete.
4. Press lock button.
5. Re-enter user code to delete.
6. Press lock button.
7. If successful, the keypad will flash green once and you will hear 1 beep (if switch #3 is on).

How do you clear a Weiser Lock code?

Are Weiser locks guaranteed for life?

Elements by WeiserTM Warranty Lifetime Mechanical Warranty – Products are warranted for a lifetime from date of purchase against mechanical failure due to faulty workmanship or materials. The warranty lasts while the original purchaser owns the lock.

How to enter master code in Weiser Lock?

1. Keep door open. Press the Program button once. The keypad will fl ash green and you will hear three beeps. 2. Press Lock button once. 3. Enter Mastercode. 4. Press Lock button once. 5. Press “9” six times. 6. Press Lock button once. Procedure continued on next page 5 / 15 62810 / 01 USA: 1-800-677-5625 Canada: 1-800-501-9471 www.weiserlock.com

How to change or add user code to Weiser / Kwikset smart door lock?

– YouTube How to change or add a user code to a weiser / kwikset smart door lock. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

How do you lock a Weiser battery pack?

Press and hold the “LOCK” button on the exterior keypad, while fully inserting the battery pack into the interior assembly (the tab on the pack must face out – see illustration). Hold down lock button until you hear 2 beeps (about 20 seconds).

How do I reset the lock on my Kwikset?

You may reset the lock by pressing the Premis Button “A” on the back panel for 20 seconds. This method will bring the lock to factory default condition but not trigger the handing process. Why is my Kwikset lock blinking red?