Menu Close

How do I resync my garage keypad?

Jim Brown

How do I resync my garage keypad?

Press and release the LEARN button on the overhead garage door opener unit. The learn indicator light will glow steadily for 30 seconds. Within this 30 second time period, press and hold the button on the hand-held remote. Next, release the button when the overhead opener unit’s lights blink.

How do I remove the code from my garage door keypad?

Erase your remote controls and keypads using the LEARN button on the garage door opener

  1. Locate the LEARN button on the garage door opener.
  2. Press and hold the LEARN button on the door control until the LED turns off (approximately 6 seconds).
  3. All previous codes are now erased.

Is there a way to reset a garage door keypad outside?

You can reset a garage door keypad without actually having the door open and being inside. Reset a garage door keypad from the outside of your garage with help from a garage door specialist in this free video clip. Bio: Jacob Swenson works for Specialized Garage Doors in Salt Lake City, Utah.

How do I Reset my overhead garage door opener?

How do I reset my overhead door remote? Press and release the LEARN button on the overhead garage door opener unit. The learn indicator light will glow steadily for 30 seconds. Within this 30 second time period, press and hold the button on the hand-held remote.

How do you change the pin on a garage door opener?

Press and hold the PROGRAM button until both LED lights turn BLUE. Release button. Press and hold the PROGRAM button again then release. Enter your PIN number using the keys on the keypad. Press the UP/DOWN button. Press the UP/DOWN button again. Press any key to stop opener.

How do you change the battery on a wireless keypad?

While holding the PROGRAM button, press and hold the UP/DOWN button for 5 seconds. Release both buttons. You must now start from the beginning and reprogram you wireless keypad. If the keypad backlight does not come on, this indicates the need to replace the batteries. Press in on the front of the battery cover and slide it down off of the keypad.