Contents
How do I turn off the lock on my Kenmore oven?
Clear the lock mechanism — as indicated by the DOOR LOC light — by pressing and holding in the oven door light switch for 20 to 30 seconds. While the switch is depressed, the latch motor will gradually withdraw the lock, allowing you to open your oven door.
How do I reset my Kenmore Ultra Bake oven?
How do I reset my Kenmore Ultra Bake Oven?
- Press the “7” button on the Kenmore Elite keypad.
- Continue holding the “7” button for at least six seconds until a single beep sounds.
- Press the “Start” button on the keypad once. This will reset the oven back to the factory default settings.
What does loc mean on Kenmore Ultra Bake stove?
LOC means the control panel is locked. Per the Use and Care Guide: 1. Check that the oven and cooktop are off. 2. Press and hold CONTROL LOCK for 3 seconds.
Why does my Kenmore oven keep locking?
That lock indicator is flashing because the oven door latch is partially or fully extended with the oven door open. Press and hold the oven door light switch in. Once it is fully retracted, you can then let go of that oven door light switch. This may reset that lock mechanism so that you can use the oven again.
How do I manually unlock my Kenmore oven door?
Press the unlock button on the control panel for 3 seconds. Look near the control panel above the oven door for a button labeled “Oven Lock.” If you don’t see this button, you may be able to unlock the door by using the “Clear/Off” button. Push the button and keep it held down to trigger the door latch.
Why won’t my Kenmore oven heat up?
If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat. If the thermal fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.
How do I unlock my Kenmore stove?
Where is the unlock button on a Kenmore oven?
Keep an eye on the display panel next to the unlock button. It has a door lock indicator with a light next to it, but the light will flash once the door latch begins moving. Some Kenmore models also beep to tell you that you have successfully disengaged the lock.
How to clear the lock mechanism on a Kenmore stove?
Clear the lock mechanism — as indicated by the DOOR LOC light — by pressing and holding in the oven door light switch for 20 to 30 seconds. While the switch is depressed, the latch motor will gradually withdraw the lock, allowing you to open your oven door. The door lock is intended to lock down your oven when you don’t want it to be used.
How do you open a Kenmore oven door?
Wait about 15 seconds for the door to finish unlocking. Modern Kenmore ovens have a motorized lock that doesn’t shut off automatically. Instead of trying to open it, check the display panel again. It will change once the door finishes unlocking. Once you see the time of day displayed on the screen, you can open the oven door.
How do you clear the lock on an oven door?