Contents
How do I unlock color stamps?
Ink towards the paper. Push back down the top cover and click into position. Unlock the stamp from the down position. Push down hard to release the locks.
How long do self-inking stamps last?
20,000 to 25,000 impressions
How long do self-inking stamps last? Our Self-Inking Stamps last anywhere from 20,000 to 25,000 impressions. Higher humidity levels can result in more impressions from the stamp.
How do you get the ink pad out of a 2000 plus?
How to Re-Ink 2000 Plus Stamps
- Push the stamp down and locate the lock switch on the right side of the stamp.
- Open the ink well by gripping both sides of the tray and sliding it out.
- Squeeze approximately five drops of Ideal ink from the refill container into each of the two holes on the ink tray.
How do you unlock a locked stamp?
First, push the stamp down and press the red buttons to lock it in place. Then with the back of the stamp facing you, push the ink pad out. Grab the pad by the edges, flip it over, and re-insert it back into the stamp. Push the stamp down slightly to release the lock, and then it’s ready!
How do self inking stamps work?
In a self-inking stamp, the ink pad works with the die to leave an impression, then retracts back into the stamp body. And, it comes with a stamp cap so your ink doesn’t dry up over time. One last difference is the time it takes to use. Pre-inked stamps need time to refresh between uses.
How do you re-ink a 2000 plus stamp?
• While pushing the stamp down slightly, push the ink pad through the stamp, and grab it from the other side. • Set the pad on the table ink side up. • Add 5-10 drops of 2000 Plus ink to the ink pad. • Once the ink has absorbed, insert the pad back in to the stamp with the ink side face down. • Snap the ink pad back in to place.
Where is the lock switch on a stamp?
Push the stamp down and locate the lock switch on the right side of the stamp. Slide the lock switch over to lock it in place. Open the ink well by gripping both sides of the tray and sliding it out. Note that you do not need to remove the tray, only slide it out–removal can damage the stamp.
How do you re-ink a self ink stamp?
• If your stamps seems to be getting dry, you can re-ink your stamp. • Pinch the front and back of the stamp cover while pulling it away from the stamp. • Remove the cover completely from the stamp. • The ink pad will now be showing. • While pushing the stamp down slightly, push the ink pad through the stamp, and grab it from the other side.