Menu Close

How do I unlock my TSA 007 Lock if I forgot the combination?

Jim Brown

How do I unlock my TSA 007 Lock if I forgot the combination?

Just reset the combination:

  1. Set the dial to 000.
  2. Turn the shackle at a 90 degree angle from the lock position.
  3. Push the shackle down (outside of the lock).
  4. Set the desired code.
  5. Pull the shackle up.
  6. Turn it back to the lock position.

How do you reset the combination on a master lock tsa007?

To reset the TSA lock, you should align the dials to zero. Pull the shackle up, turn it 90 degrees in opposite direction and then press shackle back down. Set your new combination when holding the shackle firmly down and set the new combination. Release the shackle when done and return it to position for locking.

How to open and reset a TSA lock when you forget the combination?

So, if you have forgotten your combination or you have a TSA lock stuck in an open position, then you can open and reset it by following the steps of different methods as below: As the name suggests, you have to actually try all the possible combinations starting from 000 to 999.

What’s the factory code for a TSA lock?

Your adjustable TSA combination lock as delivered can be opened with the combination 0-0-0. To change the combination: 1. Open the lock by entering the factory code 0-0-0. 2. With a pencil or something pointed, press firmly on the Reset A button which can be on either side of the lock as shown below.

What do you need to unlock a TSA luggage lock?

You could go to the airport and ask a TSA officer if they can help you unlock your luggage. Each TSA approved luggage lock has a code written on it – TSA001, TSA002, TSA003, TSA004, TSA005, TSA006, or TSA007. These codes tell the TSA officer which key they need to use to open the lock.

What do you do if you forget a lock combination?

If the lock is unlocked at the time the combination is forgotten, it’s much simpler. Just reset the combination: Set the dial to 000. Turn the shackle at a 90 degree angle from the lock position. Push the shackle down (outside of the lock). Set the desired code. Pull the shackle up. Turn it back to the lock position.