Contents
How do you break a Master Lock combination lock faster?
Standard instructions for combination lock: 1. Turn right three times. Stop at First Digit….Steps
- Set the dial to 0.
- Apply full pressure upward on the shackle as if trying to open it.
- Rotate dial to the left (towards 10) hard until the dial gets locked.
- Notice how the dial is locked into a small groove.
What do I do if I forgot my Master Lock combination?
1) Visit a Master Lock distributor/retailer
- Bring the lock to a Master Lock distributor or retailer and confirm that they offer the lost combination service.
- Ask the distributor or retailer to contact Master Lock for the combination on your behalf and we will validate ownership through them.
How can I recover my Master Lock combination?
Turn the dial 3 times to the right and stop on the first number of the sequence. Turn the dial to the left, pass the second number of the sequence and stop on it the second time around. Turn the dial to the right and stop on the third number of the sequence. Push the button while pulling the shackle.
What do you do when your Master Lock won’t open?
Please try resetting the lock again by following the instructions below:
- Place lock in the open position.
- On the back of the lock, slide the reset lever into the “up” position.
- Insert the shackle into the lock and squeeze firmly twice to “clear” it.
- Pull up on the shackle to open the lock.
- Enter your new combination.
How do you set combination on Master Lock?
1. Open the lock with the factory set (0-0-0-0) or the previously set combination. The lock must be set to the current combination, or you cannot reset it. 2. Insert reset tool (enclosed in package) in the hole on side of lock. Push reset tool in and turn 90 degrees (in either direction).
How do you change the combination on a Master Lock?
To change the combination sequence, first clear the lock by squeezing the shackle toward the lock. Open the lock again, by using the default combination sequence. Turn the lock over so you can see the back. Take a small, pointed object, such as a pin, and move the reset lever to the up position, to the “R.”.
How to unlock a number combination lock?
How to Open a Four Number Combination Lock Find your combination. Your combination should be on a slip of paper located in the package in which your lock came. Go to the first number. Roll the top wheel to the right to find the first number in your combination. Set the second dial on the lock to the second number in the combination.
What is the combination for the lock?
A combination lock is a lock that requires the entering of a specific sequence of symbols to dislodge and open. Though the symbols are typically numerical, letters and other types of symbols may also be used to formulate a sequence.