Menu Close

How do you bypass a primer bulb?

How do you bypass a primer bulb?

6 Steps On How To Bypass Primer Bulb On Weedeater

  1. Remove The Screws. You’ll notice that there are two screws on each side of the air bulb.
  2. Pull Away Air Bulb and Metal Plate.
  3. Clean The Air Bulb Seat.
  4. Put The Polythene in Place.
  5. Screw The Metal Plate Back On.
  6. Press The Polythene Ball Few Times.

Why isn’t my primer bulb won’t fill up?

The very first reason why you are experiencing this issue could be due to an air leak in the intake line. It could be that the line is not of the correct size which is why there are fitting issues. It could also be that the line with the filter isn’t submerged with the gasoline on the tank.

How do you start a Husqvarna 125B blower?

Follow the directions from the manufacturer for starting the blower. Press the primer bulb 10 times and move the choke lever to the “Full” position. Set the blower on the ground and move the variable speed control lever forward. Hold the blower and pull the starter cord until the engine attempts to start, but pull no more than three times.

How do you remove a primer bulb from a trimmer?

1. Access the carburetor. To remove the old primer bulb, the trimmer’s carburetor must be accessed. The first steps toward accessing the carburetor are to remove the air cleaner cover and the air filter. 2. Unscrew the two carburetor mount screws. The entire carburetor assembly will pull away from the trimmer after the two mount screws are free.

How do you replace a primer bulb on a t242?

5. Install the new primer bulb. For the T242, the primer bulb can be pressed into place in the mount plate from which the old bulb came. Before the primer bulb plate can be screwed back into place on the carburetor, the pieces of the disassembled carburetor must be reassembled in the correct order.

How long does it take to replace primer bulb?

In only takes a few minutes to replace a primer bulb, especially after you’re used to your engine’s primer mount design. After getting gas on your hands a few times through a cracked bulb, a small repair like this one can make you feel like you have a whole new engine.