Contents
- 1 How do you calculate stripping and waxing floors?
- 2 How long does it take to wax a floor?
- 3 How much does it cost to polish floors?
- 4 What color pad is used for stripping?
- 5 How many hours does it take to strip and wax a floor?
- 6 How long after waxing a floor can you walk on it?
- 7 How much does it cost to strip and wax a floor?
- 8 What do you need to know about waxing floors?
- 9 How to calculate strip and wax pricing-and a method to?
How do you calculate stripping and waxing floors?
Example – Strip and Wax 10,000sf VCT
- Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot.
- Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350)
- Cost of pads, mops, etc. (
How long does it take to wax a floor?
This should take about half an hour, but could be longer in areas with high humidity. After ten minutes of natural drying, you can point a fan into the room to make it dry faster, but do not point it directly at the waxed floor.
How often should floors be waxed?
every five to six months
We typically recommend that floors are professionally stripped and re-waxed every five to six months. Keeping them up to snuff is important, but don’t do it too often, as your floors are just going to be exposed to more traffic, more dirt, and more damage in that short period of time.
How much does it cost to polish floors?
Cost of Stone Floor Polishing
| Stone Floor Polishing Cost | |
|---|---|
| National average cost | $800 |
| Average range | $600-$1,000 |
| Minimum cost | $400 |
| Maximum cost | $1,800 |
What color pad is used for stripping?
Stripping will remove finish, sealer, and wax from the floor surface. What color floor pad is used for Stripping? Black or black high-productivity floor pads are the darkest, most aggressive pads and should be the pad of choice when stripping a floor.
How much do you charge to buff a floor?
Expect minimum charges of $90-$150. Buffing and stripping machines can be purchased for residential or commercial use. Typically, buffing and stripping machines cost $100-$1,500.
How many hours does it take to strip and wax a floor?
The team at ServiceMaster of Kalamazoo are professionals that follow the important steps and techniques, using powerful equipment in order to produce a spotless, protective, and attractive finish to your floors in about 7 hours.
How long after waxing a floor can you walk on it?
It is a good idea to allow as much time as possible for all the coats to cure and adhere before allowing foot traffic across the floor. Typically 8 hours of curing is adequate before opening it up to the public. 72 hours is the recommended time for fresh finish to cure prior to burnishing.
Can you mop a waxed floor?
A Waxed floor in a residential situation might require application and buffing (with a rotary buffing machine) two or even three times in it’s first year. Never wet mop a waxed floor! If care is exercised a moist cloth and a PH neutral cleaning solution can be used to clean a waxed floor.
How much does it cost to strip and wax a floor?
If you need a cleaning company to strip and wax the floors in the large building, you can expect lower prices per sq. ft. However if you are looking to strip and wax relatively small area, the prices are usually higher. Also cleaning companies have minimum prices which are in the range of $ 150 – $ 200.
What do you need to know about waxing floors?
Cost of related materials and supplies typically required to wax floors including: basic cleaning solutions, tool and machine consumables and disposable cleaning materials. Job related costs of specialty equipment used for job quality and efficiency, including: Rotating 2HP 24″ floor machine. Daily rental. Consumables extra.
How often should you clean and wax your floors?
Experts recommend most areas be cleaned and waxed every six months. Professional cleaners offer floor cleaning services that include stripping, waxing, sealing and buffing floors. Typically, the cost is dependent on the square footage of the location.
How to calculate strip and wax pricing-and a method to?
Total costs to contractor = $0.20 per square foot or $2032.00 cost for labor and material, not including travel or moving of furniture. Here are the final prices to the customer, based on various markup amounts. By keeping an eye on your material and labor prices, you can keep maintain a firm grasp on your strip and wax costs.