How do you change the code on a squire combination lock?

How do you change the code on a squire combination lock?

To change the code, you simply unscrew a screw, hold in an unlocking button and turn the wheels to the desired numbers. What’s more, the new design prevents any accidental miscoding and numbers cannot be misaligned.

How do I reset my squire lock?

Slide the cover back over the hole. Close the shackle. Rotate the dials out of sequence and pull on the shackle to make certain that it’s locked. Realign the dials to the new combination and press the shackle release button to unlock your CP1.

How do you change a combination lock?

How to Set a Combination Lock

1. Pull up the shackle to unlock.
2. Rotate the shackle 90 degrees counterclockwise and press down.
3. Hold down and continue to turn the counterclockwise another 90 degrees.
4. Set your own combination by turning the dials.
5. Turn the shackle back as normal then the setting is complete.

How do you change the code on a padlock?

How do I reset my padlock?

1. Pull up the shackle to open the lock.
2. Rotate the shackle 90° counterclockwise and press all the way down.
3. Hold down the shackle and set your own combination by turning dials.
4. Turn the shackle back as normal. The setting is now complete.

How to decode a squire 4 wheel padlock?

This video shows how to decode a SQUIRE 4 wheel combination padlock. On these locks a button must be pressed to open them once the right combination is entered. Pushing this button with a tool allows to bind the wheel sufficiently to give feedback.

How do you reset a squire CP1 combination padlock?

Untwist one wire end of a paper clip out from the paper clip body. Hold the lock in your nondominant hand. Insert the paper clip wire end into the hole and push in on it gently to press the button. Use the fingers on your nondominant hand to hold both the lock and wire paper clip in place.

How can I check if my Squire lock is working?

To check if this is the cause, please follow the below procedure: 1. Set the wheels to the combination you have tried setting it to. 2. Push and hold the button at the bottom. 3. While at the same time, use the pin provided and starting from the bottom wheel (closest to the button) and rotate the wheels slightly left to right.