Menu Close

How do you identify Salice hinges?

Jim Brown

How do you identify Salice hinges?

1. Measure the size of the hinge cup

  1. 26mm – If it is this size you have a mini hinge, the range can be found here.
  2. 35mm – If it is this size you have a standard cup hinge, the range can be found here.
  3. 40mm – If it is this size you have a Series F hinge, the range can be found here.

How do Salice hinges work?

Salice hinges are more versatile than typical pin-type hinges because they adjust in three different ways. The sideways adjustment moves the cabinet door left or right. The depth adjustment closes the door flat against the cabinet. The height adjustment moves the cabinet door up and down.

Are Blum and Salice hinges interchangeable?

Blum is pretty much interchangeable with a Salice pattern, just order your friend a couple of 170* Blum hinges.

Which is better Blum vs Hettich?

There is no better or worse . Hettich and blum are both good fittings and well used. Blum is used in more high end kitchens. Hettich caters to both mid and high segment.

How to identify your hinge with Salice direct?

So at the SaliceDirect conference table (just a couple of upturned cardboard boxes) we decided to put our heads together to come up with something for you to identify your hinges. After numerous cups of tea and cueing the music way too many times we came up this: 1. Measure the size of the hinge cup

How to install Rockler’s Salice hinge and plate for overlay doors?

With Rockler’s Salice Hinge and Plate for 3/8″ Overlay Doors, you can finish off your next cabinetry refurbishing project with easy-to-install, easy-to-adjust European concealed hinges. Learn more: http://www.rockler.com/salice-hinge-a… Loading…

How do you put hinges on cabinet doors?

Put the hinge on the hinge-side of the cabinet door where you marked from the bottom and arrange it so it’s in the position it needs to be installed in. Use a pencil to mark around the hinge so you know where you need to bore your hole. Repeat the process for the mark you made at the top of the cabinet door.

How do you measure the size of a hinge?

Doing this first will narrow down the possible choices of hinge. To measure the cup size either measure the hole in your cabinet door or measure the cup on the hinge itself . There are three possible size of cup that your hinge could be:

How do you identify Salice hinges?

Jim Brown

How do you identify Salice hinges?

1. Measure the size of the hinge cup

  1. 26mm – If it is this size you have a mini hinge, the range can be found here.
  2. 35mm – If it is this size you have a standard cup hinge, the range can be found here.
  3. 40mm – If it is this size you have a Series F hinge, the range can be found here.

What hinge do you use for full opening?

Offset hinges A 90-degree offset corner hinge is an example. Offset hinges help when manoeuvring through narrow doorways. With offset hinges, also known as swing-clear hinges, you can open the door so that it’s out of the way, giving you complete access to the entire width of the doorway.

How to choose the right cabinet hinge for your project?

This guide walks you through all the options, and helps you choose the right hinge for your project. The best place to start is to figure out what type of cabinets and doors you have because that’s typically how hinges are broadly categorized.

What kind of hinges do you need for a door?

Essential components for cupboards and doors, hinges come in all types and materials to suit different requirements. They may be left- or right-handed, lift-off or concealed, stainless steel or brass… In short, the choice alone is enough to make you come unhinged!

Can a butt hinge be used on a heavy door?

A butt hinge is a lightweight hinge that is not suitable for heavy doors. Surface-mounted concealed hinges cannot be seen when the cupboard door is closed. This is the type of hinge you find on most kitchen cabinets. Recessed concealed hinges are mortised into the edge of the door and the frame or front of the cabinet.

What kind of hinges do you use on face frame cabinets?

Faceframe Cabinet (left) & Frameless Cabinet (right). Face Frame cabinets – Face-frame cabinets incorporate a frame (often made from 1-1/2″ to 2″ wide solid wood) that is attached to the front edges, or face, of the case. Hinges mount to this face frame. This is the most common style in American cabinets.