Contents
How do you remove the light cover on a subzero refrigerator?
To remove the light shield, gently compress the shield to release the top, then the bottom. The bulb is now accessible. To install the shield, put the bottom in place first, then compress and insert the top.
Where is the light in a Sub Zero refrigerator?
In all models except 501 and 601, the light switch is mounted to the top mainframe. In models 501 and 601, the switch is mounted to the bottom mainframe above the unit grille.
How do I change the bulb in my subzero 632?
Remove the old bulb at the top of the drawer compartment by twisting counterclockwise. Replace with a new 25-watt appliance bulb by twisting it clockwise to lock in place. Return the light diffuser to its place by pushing it down in its slots. Slide the shelf and/or drawer back into place.
How do you remove a light diffuser?
How do you remove a light diffuser?
- To remove, press the center of the front tabs up and push the diffuser toward the back wall. Refer to the image below. There are two tabs, one each on the left and right.
- Drop the front edge of the diffuser down slightly.
- Pull diffuser forward out of the appliance.
Why is the light off in my Subzero refrigerator?
Make sure the door was not left open for an extended period of time. If it was, the light terminator feature can turn on and turn off the lights. See Light Terminators for more information, including steps to reset. If possible, test light bulbs in another light fixture.
How do you reset a Sub-Zero refrigerator?
To reset this unit, shut off the circuit breaker of the refrigerator for about 30 seconds. Turn it on again. You can also unplug it from the wall socket it is connected to if you cannot find the circuit breaker. This resets the unit.
What causes refrigerator light not working?
If your refrigerator light is not coming on, it may be that the bulb has reached the end of its lifespan and has burned out. Check the bulb to see if it has a dark area in the bulb or has a broken and loose filament. Unplug your refrigerator, change the bulb, and it’s likely that this will solve this problem.
How to replace 40 watt light bulbs in Sub Zero refrigerator?
A few compatible replacement 40 watt light bulbs with their part numbers are as follows: Sub-Zero 7014647 , Feit Electric 5300136187 and TacParts B01KGNOINK. No tools are needed to access and replace the light bulbs. The very first step is to unplug the refrigerator or turn off the breaker switch at the home’s electrical panel.
What kind of light bulbs do subzero use?
SubZero currently recommends using 40W 120V T6 1/2 (T6.5) E17 intermediate sized threaded base bulbs. A few compatible replacement 40 watt light bulbs with their part numbers are as follows: Sub-Zero 7014647, Feit Electric 5300136187 and TacParts B01KGNOINK. No tools are needed to access and replace the light bulbs.
How to replace a burnt out freezer light bulb?
Slip the front edge of the lens cover out of its slot. Set the lens cover aside in a safe place. Carefully remove the burnt out light bulbs by twisting them in the counterclockwise direction.
What do I need to replace light bulbs in my Refrigerator?
No tools are needed to access and replace the light bulbs. The very first step is to unplug the refrigerator or turn off the breaker switch at the home’s electrical panel. The next two steps are to open the refrigerator door and then clear off any breakable glass or fragile items from the top shelf.